CGF - Powered by Discuz! Board

標題: 新手marui m4 一問 [打印本頁]

作者: Kira 時間: 18-7-2007 21:44 標題: 新手marui m4 一問

各位師兄師姐，小弟想買枝marui m4
但係知道有新版同舊版
唔知可以點樣分呢? 因為諗住買枝二手m4

我只係知睇個尾柄(佢換左都得架姐)
一體管係點樣?? 唔識睇...
耳仔馬記website 話用左金屬... 唔知係點樣呢?
如果有相指出就好啦...

唔該各位師兄師姐

作者: LifeAfterDeath 時間: 19-7-2007 01:04

I really donno the stock what is like when compare the new and old version of TM M4A1... anyway I bought a second hand M4A1 and work from there... since I changed most of the stuffs already...

for the outer barrel... better to buy the one with full set... like GnP is a easy start... but again you don't have to buy it right the way...

and if you really want you could buy some nice outer barrel (around $1000) but unless you plan to only work on one airsoft... if not then work from GnP one...

作者: Kira 時間: 19-7-2007 10:40

oic... is that a must to use GnP set to prevent "shake head"?

作者: louisli 時間: 19-7-2007 10:44

引用:

原帖由 Kira 於 19-7-2007 10:40 發表
oic... is that a must to use GnP set to prevent "shake head"?

你可以睇下新手指南，有方法可以fix 個搖頭
睇你肯唔肯落手落腳去做

作者: Kira 時間: 19-7-2007 15:02 標題: 回覆 #4 louisli 的帖子

我都有諗過咁做，但係奈何冇開牙那set 工具，而且之前開過，開歪了.....

作者: LifeAfterDeath 時間: 19-7-2007 18:05

引用:

原帖由 Kira 於 7/19/07 10:40 發表
oic... is that a must to use GnP set to prevent "shake head"?

not really... but seem most ppl recommand the GnP cux you can buy any real R.I.S. or R.A.S. to install on it...
so that is why most ppl like it...

作者: Kira 時間: 20-7-2007 00:41

oic... thanks so much!!

作者: 14692 時間: 20-7-2007 05:07 標題: 回覆 #5 Kira 的帖子

去鴨記買絲公&絲扳

作者: fuppc 時間: 20-7-2007 08:49

重買馬記.......遲下改件重貴過枝槍！！！

作者: LifeAfterDeath 時間: 20-7-2007 11:33

引用:

原帖由 fuppc 於 7/20/07 08:49 發表
重買馬記.......遲下改件重貴過枝槍！！！

but some ppl like me only like TM...

my C8 is work from TM M4A1

作者: 14692 時間: 21-7-2007 04:46 標題: 回覆 #9 fuppc 的帖子

分分鐘散砌仲平

(講笑)

歡迎光臨 CGF (http://wargamehk.com/cgf/)