CGF - Powered by Discuz! Board

標題: Leupold Mark 4 MR/T 1.5-5x20mm CMR2 [打印本頁]

作者: laiwangkai 時間: 4-2-2015 11:49 標題: Leupold Mark 4 MR/T 1.5-5x20mm CMR2

Still thinking for the mount......
Don't want to use the Leupold mount
Can anyone give me some ideas for the mount

note(2/8/2015):If you have ~USD$1K to spend on scope, NF is your better choice.
Sure Leupold has great customer service (in US only), but still NF is better than Leupold.
I recommend this scope if you just have ~USD$800, otherwise NF, Vortex razor is highly recommended.
(NF has some scope <USD$1K call NF SHV, but it only has long range scope.)

[ 本帖最後由 laiwangkai 於 8-2-2015 14:31 編輯 ]

圖片附件: DSC_0804.JPG (4-2-2015 11:49, 50.01 KB) / 該附件被下載次數 215
http://wargamehk.com/cgf/attachment.php?aid=227488

圖片附件: DSC_0805.JPG (4-2-2015 11:49, 77.11 KB) / 該附件被下載次數 215
http://wargamehk.com/cgf/attachment.php?aid=227489

圖片附件: DSC_0806.JPG (4-2-2015 11:49, 78.85 KB) / 該附件被下載次數 237
http://wargamehk.com/cgf/attachment.php?aid=227490

圖片附件: DSC_0810.JPG (4-2-2015 11:49, 87.29 KB) / 該附件被下載次數 213
http://wargamehk.com/cgf/attachment.php?aid=227491

圖片附件: DSC_0811.JPG (4-2-2015 11:49, 74.36 KB) / 該附件被下載次數 208
http://wargamehk.com/cgf/attachment.php?aid=227492

圖片附件: DSC_0812.JPG (4-2-2015 11:49, 81.11 KB) / 該附件被下載次數 203
http://wargamehk.com/cgf/attachment.php?aid=227493

圖片附件: DSC_0813.JPG (4-2-2015 11:49, 90.35 KB) / 該附件被下載次數 223
http://wargamehk.com/cgf/attachment.php?aid=227494

圖片附件: DSC_0815.JPG (4-2-2015 11:49, 75.37 KB) / 該附件被下載次數 214
http://wargamehk.com/cgf/attachment.php?aid=227495

作者: machine 時間: 4-2-2015 14:52

larue LT104?

作者: loveless 時間: 4-2-2015 16:15

快拆的話個人覺得ADM 係眾多種設計中最實淨的...
若講老番更加係贏晒

非快拆非軍用非貴野的話, 我見到呢隻Aero只係$85美金, 點睇都好過(甚至)burris...

作者: geoprotex 時間: 4-2-2015 16:28

Night Force Ultralite

作者: rho837 時間: 4-2-2015 16:48

LaRue very good but expensive

American Defence nice and OK cheap

作者: laiwangkai 時間: 4-2-2015 23:16

小弟剩係摸過LaRue 既LT104未用過
真係好用？
價錢還可以
最怕上鏡唔實會有位...

作者: machine 時間: 5-2-2015 01:25

Larue QD mount will scratch the rail, ADM not so much. Both LT and ADM mount can be adjusted to be as tight as you need.

[ 本帖最後由 machine 於 5-2-2015 01:30 編輯 ]

作者: AICSman 時間: 5-2-2015 09:13

Hey Bro, Spuhr or GDI. Top Quality mount you can get.

LT will cut slide your rail with mark. ADM kind of filmy.

http://www.gdiengineering.com/st ... tic-mount-0moa.html

http://milehighshooting.mycustom ... t=mount&rid=476

LT will cut slide your rail with mark. ADM kind of filmy.

[ 本帖最後由 AICSman 於 5-2-2015 09:18 編輯 ]

作者: laiwangkai 時間: 5-2-2015 13:02 標題: 回覆 8# 的帖子

Thanks so much
but I AM just using Mark 4 (on real steel)
so I just spend $200 to buy a nice mount..
Maybe next time when I change to S&B or Leupold Mark 6/8 I will try it.
By the way this is the best mount that I have never seen before(the outlooking)

[ 本帖最後由 laiwangkai 於 5-2-2015 13:08 編輯 ]

作者: AICSman 時間: 5-2-2015 14:06

if you want to spend 200 USD, try this brand Bobro. i have it, it is the QD type. it returns zero everytime when i dismount and mount back on my Remy700 and AR10 precision rifle. it Built like a Tank. it highly recommend in US precision shooting community.

Nobody in Asia know that LaRue mount really suck big time. No one use it on their precision rifle or AR. The contact point of the LaRue mount is very minimum on the rail. it will shifts.

If anyone watch the Magpul video, the products crews behind the screen experienced LaRue mount shifted and off zero the whole day while filming. Rifle you can buy LaRue, Mount you should stay away.

ADM QD mount don't return to zero after you taken on and off.

Top shooting community in US use GDI, Spuhr, Seekin, Bobro, Badger.

make sure you mount on the correct in/lbs torque spec. Ring screw tq it down to 15-20 in/lbs. Mount screw on rail tq it down 45-50 in/lbs.

[ 本帖最後由 AICSman 於 5-2-2015 14:14 編輯 ]

作者: laiwangkai 時間: 6-2-2015 00:57 標題: 回覆 10# 的帖子

Really nice

I decide to buy Bobro mount

Reasonable price

作者: AICSman 時間: 6-2-2015 01:51

or you can try this brand also. I personally recommend to all my friends. Price is reasonable.

this brand called "Alamo four stars" all make in USA.

this mount focus on Grabbing more Rail which it super secure during any hard impact or recoil.

[ 本帖最後由 AICSman 於 6-2-2015 01:52 編輯 ]

作者: tokyojoe 時間: 6-2-2015 09:58

Check out Recoil magazines #17 issue
Battle of the mounts

圖片附件: IMG-20150206-WA0009.jpg (6-2-2015 09:58, 128.87 KB) / 該附件被下載次數 227
http://wargamehk.com/cgf/attachment.php?aid=227587

圖片附件: IMG-20150206-WA0008.jpg (6-2-2015 09:58, 114.95 KB) / 該附件被下載次數 238
http://wargamehk.com/cgf/attachment.php?aid=227588

作者: loveless 時間: 6-2-2015 10:05

wow 原來ADM 數據上o甘比下去
真係要睇多D
thx

作者: AICSman 時間: 6-2-2015 10:08

NICE !!

作者: AICSman 時間: 6-2-2015 10:18 標題: 回覆 14# 的帖子

0.135 MOA shift is only like 3.4mm impact shift at 100 yards. CQB is OK.

Here is my LaRue 50 BMG Mount which i regret...

took it off from my 338 Lapua rifle

[ 本帖最後由 AICSman 於 6-2-2015 10:43 編輯 ]

作者: loveless 時間: 6-2-2015 10:42

引用:

原帖由 AICSman 於 6-2-2015 10:18 發表
0.135 MOA shift is only like 3.4mm impact shift at 100 yards. CQB is OK.

sure that's why i said by numbers it don't look too hot
but still there clearly exists a group of mounts at similar price point that would perform better consistently, that's worth noting hence thanks for the info

作者: laiwangkai 時間: 6-2-2015 10:45

其實我又唔算係玩"Precision Shooting"
有時用下支ar15 打下50-100 yards
試過用M1 X EBR 手托唔用腳架打250yards 人靶十槍得2定3槍上到靶

(果時用友人既S&B PMII 3-12 用8倍打)
我只係想買個拆幾次/打幾十匣都唔會Zero唔到既mount

Leupold mark 6 mount又難搵
Mark 4 又唔掂...

作者: AICSman 時間: 6-2-2015 10:47

We all just want to have some fun. Enjoy life.

作者: laiwangkai 時間: 8-2-2015 14:22

其實又有D後悔買左呢支Leupold

本身自己有支nightforce nxs 1-4 fc2 zerostop 同之前有過leupold m3 3.5-10x40
聽人講話呢支幾好就買左
結果光度完全同nf係冇得比

早知留錢黎買S&B...

歡迎光臨 CGF (http://wargamehk.com/cgf/)