CGF - Powered by Discuz! Board

標題: Steyr AUG (Thales F90) [打印本頁]

作者: jacky2038 時間: 23-3-2019 10:55 標題: Steyr AUG (Thales F90)

提示: 作者被禁止或刪除內容自動屏蔽

作者: ayaka 時間: 23-3-2019 11:07

DIE HARD個時見到AUG己經覺得好科幻

作者: kornhill401 時間: 23-3-2019 12:29

呢款槍,以外型計,在我心中,暫時仲係排第一位.

[ 本帖最後由 kornhill401 於 23-3-2019 12:31 編輯 ]

作者: rho837 時間: 23-3-2019 13:25

AUG 係好好射！支槍其實在1967年以經成初形！當年呢支屬於NATO班人, 以經學AK47行piston又係quick change barrel (QCB)，重係bullpup槍！算係超時代設計！

作者: jacky2038 時間: 23-3-2019 14:47

提示: 作者被禁止或刪除內容自動屏蔽

作者: RCOOH 時間: 23-3-2019 15:39

引用:

原帖由 kornhill401 於 23-3-2019 12:29 發表
呢款槍,以外型計,在我心中,暫時仲係排第一位.

個底板細番少少就very good了。

作者: screwupman2022 時間: 23-3-2019 17:20

引用:

原帖由 jacky2038 於 23-3-2019 10:55 發表
F90

F字頭係澳洲軍用既改版...?

作者: jacky2038 時間: 23-3-2019 18:21

提示: 作者被禁止或刪除內容自動屏蔽

作者: Ben_9413 時間: 23-3-2019 19:17

O尼支配色好靚

作者: screwupman2022 時間: 23-3-2019 21:22

引用:

原帖由 Ben_9413 於 23-3-2019 19:17 發表
O尼支配色好靚

哩個世態唔執好吓個外型，都好難俾電影製作人睇中，普通槍民更會加分推佢入自己張wish list

作者: screwupman2022 時間: 23-3-2019 21:30

引用:

原帖由 jacky2038 於 23-3-2019 18:21 發表

No, They are called EF88 in 澳洲軍

http://www.lithgowarms.com/f90/

F90 只係 EF88 的外銷版...

https://en.wikipedia.org/wiki/Steyr_AUG#Australian_versions_2

EF88: The Enhanced F88 (EF88) is part of the LAND 125 Soldier Combat System project and is a significant upgrade to the F88SA2. It was developed and produced at the Australian Defense Industries factory in Lithgow Small Arms Factory, which is now owned by Thales Australia to fulfill current and near future requirements for the Australian Defence Force and is also intended for export (F90). It was first displayed to the public in the middle of 2012 and the initial production was scheduled for 2013, its final design and testing ended later on that year.[31] While internally and externally the EF88 is still similar to the Steyr AUG, it has received many distinctive upgrades and changes. Upgrades include the following:
1. Length of pull has been shortened by 15 mm. (The distance between the stock backplate and the grip; too long and it becomes difficult to handle on close quarters)
2. Longer top rail and a modular lower forend with side and bottom rails.
3. Floating barrel which increases accuracy.
4. Fluted Barrel which dissipates heat from automatic fire.
5. Folding charging handle.
6. Improved butt design which has increased strength and a recessed ejection port cover to improve reliability.
7. Bolt-together butt for easier disassembly.
8. Cyclic rate of fire of 850 rounds per minute (RPM).
9. Provision for electronic architecture to allow centralized control and power management of ancillary devices.
10. Primarily uses the side-loading grenade launcher (Steyr-Mannlicher SL40) which can fire all currently available 40 mm low velocity grenades.
11. Improved grenade launcher mount which improves the balance of the weapon.
12. Improved grenade launcher safety, the new KORD RIC (Rifle Input Control) electronic control system made by Thales will also be integrated into the rifle.[30][32][33]

F90: The intended for export version of the EF88. In June 2012, Thales debuted the F90 at the Eurosatory military exhibition in Paris. Key additions include a bottom rail and a detachable side rail, optional compatibility with STANAG magazines, weight savings over the F88SA2 with a base weight of 3.25 kg (7 lb) and the large trigger guard has been reshaped to serve as a vertical foregrip. Thales in partnership with Steyr-Mannlicher are pursuing small arms procurement programs such as the planned replacement of FAMAS rifle used by the French military. F90 variants include Grenadier, Marksman (508 mm (20 in) barrel) and Close Quarters Battle (360 mm (14 in) barrel).[34] Low Rate Initial Production of the F90 began in September 2014.[35] Dasan Manufacturing will be licensed to manufacture them in an effort to bid them to the South Korean military for future replacements of the Daewoo K2.[36] At the Defexpo 2018 convention, MKU has Indian licensing rights to manufacture the F90 for Indian contracts.[37]

作者: screwupman2022 時間: 23-3-2019 21:35

引用:

原帖由 jacky2038 於 23-3-2019 10:55 發表
模塊化, 部件設計方便拆卸, 相同機匣和動作部件為基礎所組成的各種不同的武器（自動步槍、輕機槍、卡賓槍）

槍機和彈匣位於扳機後方Bullpup無槍托 , 槍機和彈匣位於扳機後方, 在相同的槍管長度下,槍身短

塑料製 ...

AUG 有冇last round bolt hold open既功能？

BTW, 美國槍民好多都中意哩支七十年代產物...
由美國生產商 Microtech Small Arms Research (MSAR) 複製 AUG 叫STG-556... 最新版可以插AR-15的標準STANAG彈匣...仲有埋 bolt catch/release

[ 本帖最後由 screwupman2022 於 23-3-2019 21:48 編輯 ]

作者: YMM 時間: 23-3-2019 21:43 標題: 回覆 12# 的帖子

有，thanks for sharing.;

作者: screwupman2022 時間: 23-3-2019 22:47

引用:

原帖由 YMM 於 23-3-2019 21:43 發表
引用:
AUG 有冇last round bolt hold open既功能？
有，thanks for sharing.;

thank you
真係有last round bolt hold open...不過冇bolt release...要拉雞回膛...

https://youtu.be/SXMh9t7MBUk?t=423

作者: jacky2038 時間: 24-3-2019 00:21

提示: 作者被禁止或刪除內容自動屏蔽

作者: screwupman2022 時間: 24-3-2019 15:49

引用:

原帖由 jacky2038 於 24-3-2019 00:21 發表

thank you
真係有last round bolt hold open...不過冇bolt release...要拉雞回膛... https://youtu.be/SXMh9t7MBUk?t=423

AUG Reload 教學, 有d 有 , 有D 冇

https://www.youtube.com/watc ... [/quote]

yes, Steyr AUG 的 A3型號有bolt release

作者: screwupman2022 時間: 24-3-2019 15:53

引用:

原帖由 jacky2038 於 23-3-2019 10:55 發表
模塊化, 部件設計方便拆卸, 相同機匣和動作部件為基礎所組成的各種不同的武器（自動步槍、輕機槍、卡賓槍）

槍機和彈匣位於扳機後方Bullpup無槍托 , 槍機和彈匣位於扳機後方, 在相同的槍管長度下,槍身短

塑料製 ...

F90 vs. Steyr AUG

1. AUG F90 的重量的重心位處槍中間的握把位置...好似握手槍那樣輕鬆地單手握槍發射也不成問題...比較 X95 的重量分佈是頭輕尾重，示範：https://youtu.be/6847L8aEA6A?t=635

2. AUG F90 不似 Steyr AUG 可以只單件型式快換槍管(quick change barrel)...取而代之是簡單地按下一個take down掣，就可以把整組槍管連帶前段槍身(和槍身上面的魚骨和瞄具)換走，示範：https://youtu.be/6847L8aEA6A?t=1094
Steyr AUG 可以只單件型式快換槍管(quick change barrel)，示範：https://youtu.be/6847L8aEA6A?t=876

3. AUG F90 比較 Steyr AUG 多設有一個「擋殼屏 brass reflector」，防止彈殼往後飛，所以射手可以左手握槍、左腮貼住右面槍托，拋出來的彈殼只往前或側面飛走，不會打到後面的臉，但要記得將臉移到擋殼屏的後面...左手握槍射擊示範：https://youtu.be/6847L8aEA6A?t=606

4. AUG F90 和 Steyr AUG A3 一樣設有 bolt release...配合last round bolt hold open使用bolt release，毋須拉機回膛；https://youtu.be/6847L8aEA6A?t=537

5. AUG F90 跟槍的扳機組(trigger group)不似 Steyr AUG，扣雞的感覺比Steyr來得清脆、順滑，Steyr AUG 的trigger常被人惡評為"mushy trigger pull"，要換入aftermarket的補品trigger，這也是 Steyr AUG 最明顯的缺點...https://youtu.be/6847L8aEA6A?t=758

6. AUG F90 拆槍示範：https://youtu.be/6847L8aEA6A?t=718

作者: 新手一隻 時間: 24-3-2019 17:33

提示: 作者被禁止或刪除內容自動屏蔽

作者: screwupman2022 時間: 24-3-2019 18:02

引用:

原帖由 新手一隻 於 24-3-2019 17:33 發表

其實片中示範嗰舊take down button根本就係AUG o既分解pin嚟，AUG一樣可以按開條pin之後抽出成份前段。

yes, 我在上面的#2 文字內容都寫左

分別在...Steyr的AUG 可以再由個前段機匣分開抽條獨立槍管出來...Thales的AUG F90只可以抽整組前段機匣連埋槍管，，不可只抽走條獨立槍管出來，或者可以再由前段機匣分解條獨立槍管出來，不過條片冇講

作者: 新手一隻 時間: 24-3-2019 18:11

提示: 作者被禁止或刪除內容自動屏蔽

作者: screwupman2022 時間: 24-3-2019 18:18

引用:

原帖由 新手一隻 於 24-3-2019 18:11 發表

我以為你講AUG只可以抽槍管，冇得一鍵分解。

係我寫漏...多謝師兄細心的補充

睇條片續睇落去有影點樣分解埋個前段機匣:
Steyr AUG 可以只單件型式快換槍管(quick change barrel)，示範：https://youtu.be/6847L8aEA6A?t=876

歡迎光臨 CGF (http://wargamehk.com/cgf/)