CGF - Powered by Discuz! Board

標題: 請問一下g3怎入手? [打印本頁]

作者: thomasfungyw 時間: 21-8-2008 16:12 標題: 請問一下g3怎入手?

請問一下g3怎入手?
如果要買的話?
1. 有那幾個廠有出呢?
2. 品質好嗎?
如果要買馬記的再改成g3
3. 要買那把槍呢?
4. 要買那些parts呢?

5. 有其他更好的方法入手嗎?
謝謝各位師兄回答!!

作者: sunny2014 時間: 21-8-2008 16:43

邊把G3先
好多個型號喎

作者: thomasfungyw 時間: 21-8-2008 17:51

G3A3

作者: Dominic 時間: 21-8-2008 18:43

assuming you want the early g3a3 (OD furniture with holes in handguard)
both marui and classic army have G3A3 s,
here are some basic differences between the two brand:

Marui : plastic receiver and frontset, cheap alloy metal parts, nice and stable internal parts

Classic Army : full metal frame and frontset, minor flaws like casting marks on the metal parts, rough quality internal parts, wrong markings on receiver..

the marui one is out of production for a while so your best chance is a second hand one. If you want a new one go for classic army. If you want a really nice G3A3, I would suggst the marui g3a3, (or a g3a4 / sg1 if you can't find one) and fit in authentic handguard, pins and stock..these can be seen once in a while at online mil. surplus shops..

作者: sunny2014 時間: 21-8-2008 20:24 標題: 回復 4# 的帖子

老馬果枝A3停產左N世啦
而家得番屍A果枝

用老馬「應該」砌唔番果個樣
最多似呢枝A3↓

如果係咁原裝SG1仲好
反正仲出緊

作者: Dominic 時間: 21-8-2008 20:35

get the real stuff, only need slight modifications
price is reasonable too

圖片附件: Gewehr01.jpg (21-8-2008 20:35, 24.58 KB) / 該附件被下載次數 89
http://wargamehk.com/cgf/attachment.php?aid=53391

作者: Dominic 時間: 21-8-2008 21:42

* of course it all depends on your budget, if you want a realistic one, modify with a marui as base, with authentic furniture and metal parts..
If you have lower requirements, just get the classic army one, it works fairly good after modifying and a little fittings..

作者: 老鼠 時間: 21-8-2008 23:30

如果純收藏,最好就買馬記手拉果枝
如果要落場的話,c@果枝執執啦~

作者: 里安 時間: 22-8-2008 00:18

國狗都有出G3A3

作者: ranger_hk 時間: 22-8-2008 11:09

1. 有那幾個廠有出呢?(老馬,za,國9)
2. 品質好嗎?(老馬,za都ok的!國9你要D乜品質??)
如果要買馬記的再改成g3(唔明你要改乜???)
p.s. ZA果個hop up 係 A2 hop up!!

作者: thomasfungyw 時間: 23-8-2008 00:41

唔該曬各位巴打