標題: [認真] bitcomet [打印本頁]

---

作者: 101653    時間: 20-11-2008 01:11     標題: bitcomet

咁呢....事源於我E家搬左去同我叔父住....
咁呢....一條線(香江寬頻)就要分兩部電腦用....
咁呢....E家就用緊之前買落既ASUS router - WL-520G....
咁呢....我阿叔話自從用左router之後個bt慢左or直情down唔到....行得果幾kb幾kb....
咁呢....我初時都唔信....跟住試試用佢部機down我岩岩down完既喰靈....
咁呢....真係發覺慢左好多....我部機行緊4xxkb....佢行緊4kb....
咁呢....又聽到佢喊苦喊忽咁....唯有幫佢搵解決放法....
咁呢....有fd同我講話可能佢window Vista可能同個router有野撞....可能我用XP所以冇事....
咁呢....我想問問如果安裝最新的bt程式會唔會又係出現同樣情況??同埋有冇師兄用緊vista又用緊router又冇以上情況發生....又可以講解下用緊d咩版本bt同埋用緊咩router??



謝指教

---

作者: 莊家-犯罪無間    時間: 20-11-2008 02:45

3.禁止討論、發佈任何有關非法活動, 如發佈不合法BT SEED 下載網址、含發佈BT SEED之網站網址

cgf 講bt 都係..............

---

作者: louisli    時間: 20-11-2008 10:52

引用:

原帖由 莊家-犯罪無間 於 20-11-2008 02:45 發表
3.禁止討論、發佈任何有關非法活動, 如發佈不合法BT SEED 下載網址、含發佈BT SEED之網站網址

cgf 講bt 都係..............

bt 都唔一定係不合法既...

可能係個router超負荷
試下reboot router睇下會唔會快返少少？
如果快左，但一陣又慢返的，就試下減低bt 的連線數

---

作者: 亞龍    時間: 20-11-2008 11:06

咁又係......BT 都可以合法地用的,但電腦野我唔識,幫唔到手

---

作者: derek_lok    時間: 20-11-2008 12:44

引用:

原帖由 莊家-犯罪無間 於 20-11-2008 02:45 發表
3.禁止討論、發佈任何有關非法活動, 如發佈不合法BT SEED 下載網址、含發佈BT SEED之網站網址

cgf 講bt 都係..............

個程式唔係非法程式呢既,,不過有人用程式做犯法既事之嘛.....

香港D報紙講到用BT就等於犯法,,其實唔係既,,你問下d IT電腦人就會容易明白,,

唔知就嚇死,,知左就笑死~

如果我自己有份File,,要趕住散開比人,,但係個file太大,,又無可能遂個遂個send,,咁用BT係其中一個方法囉~~

---

作者: Pvt.King    時間: 20-11-2008 13:06

好大可能係router無set番個port, 但隻隻router唔同, 好難教你點set, 我果個就係好似張圖咁(個service port係你個bitcomet d 選頂度應該有寫)

---

作者: Pvt.King    時間: 20-11-2008 13:14

剛剛係utorrent果度睇左你個router, 你跟住呢個網set就應該ok
http://www.portforward.com/engli ... L-520G/BitComet.htm

---

作者: gtoray    時間: 20-11-2008 15:08

引用:

原帖由 derek_lok 於 20-11-2008 12:44 發表


個程式唔係非法程式呢既,,不過有人用程式做犯法既事之嘛.....

香港D報紙講到用BT就等於犯法,,其實唔係既,,你問下d IT電腦人就會容易明白,,

唔知就嚇死,,知左就笑死~

如果我自己有份File,,要趕住散開 ...

其實....真係有人用 bt 來散開工作 file 咩...?

---

作者: jwlchan    時間: 20-11-2008 15:14

你要free up 個BT port (normally 6881 to 6889), 使可以通過 router firewall and the NAT.......

What ports does BitTorrent use? Will it work with a firewall/NAT?The quick summary: You need to forward your ports if you have NAT in order to get the fastest speeds.This is probably the most common thing that people fail to do whenusing BitTorrent. Read on for more details of what all this entails,and if it's something that you need to do.
Prior to version 3.2, BitTorrent by default uses ports in the range of 6881-6889. As of 3.2 and later, the range has been extended to 6881-6999.(These are all TCP ports, BitTorrent does not use UDP.) The clientstarts with the lowest port in the range and sequentially tries higherports until it can find one to which it can bind. This means that thefirst client you open will bind to 6881, the next to 6882, etc.Therefore, you only really need to open as many ports as simultaneousBitTorrent clients you would ever have open. For most people it'ssufficient to open 6881-6889.
The port range that BitTorrent uses is configurable, see the section on command line parameters, specifically the --minport and --maxport parameters.
The trackers to which BitTorrent must connect usually are on port 6969, so the client must have outbound access on this port. Some trackers are on other ports, however.
BitTorrent will usually work fine in a NAT (network addresstranslation) environment, since it can function with only outboundconnections. Such environments generally include all situations wheremultiple computers share one publicly-visible IP address, mostcommonly: computers on a home network sharing a cable or xDSLconnection. If you are unsure of whether you have NAT or not, then try this link which will try to determine if you are behind a NAT gateway.
However, you will get better speeds if you can acceptincoming connections as well. To do this you must use the "portforwarding" feature of whatever is performing the NAT/gateway task. Forexample, if you have a cable or DSL connection and arouter/switch/gateway/firewall, you will need to go into theconfiguration of this device and forward ports 6881-6889 to the localmachine that will be using BitTorrent. If your device makes it hard toenter a range of ports (if you must enter each one separately), thenyou can just do the first 10 or so ports, or however many simultaneousclients you plan to ever have open. If more than one person behind sucha gateway wishes to use BitTorrent, then each machine should use adifferent port range, and the gateway should be configured to forwardeach port range to the corresponding local machine.
If you have one of these broadband router/NAT devices (such as theLinksys BEFSR41, D-Link DI-701/704, Netgear RT311, SMC Barricade, 3ComHome Ethernet Gateway, etc.) you will usually need to enter the webconfiguration of the device. If you're not sure, try http://192.168.1.1 or sometimes http://192.168.0.1.If you can't figure it out, try the manual for the device -- they areoften on the manufacturer's web site in PDF form. You can also try theforums at places like Broadband Reports or Practically Networked. To see an example of what you're looking for, this is a link to the Linksys BEFSR41 manual. Look at page 55, under the section "Port Range Forwarding."
If you are using Microsoft's ICS (Internet Connection Sharing), this article on mapping ports might be useful.
If you are using a software firewall, then you must also enableincoming connections to be answered by the BitTorrent client program.Note that Windows XP includes a primitive firewall ("InternetConnection Firewall" or ICF) which you may have to configure forBitTorrent. Here are the directions for opening ports in the Windows XP firewall:

• Open the 'Network Connections' folder (click Start, then Control Panel, then Network and Internet Connections, then Network Connections.)
• Click the shared connection or the Internet connection that is protected by Internet Connection Firewall, and then, under Tasks, click Change settings of this connection.
• On the Advanced tab, click Settings.
• For each port you wish to forward, (i.e. 6881, 6882, ... 6889) do the following:
  • On the Services tab, click Add and enter all of the following information:
  • In Description of service, type an easily recognized name for the service, such as "BitTorrent".
  • In Name or IP address of the computer hosting this service on your network, enter 127.0.0.1 (this means "the local machine.")
  • In both External and Internal port number for this service, enter the port number, e.g. 6881.
  • Select TCP, then OK.

See this link or this link for more information about the XP firewall.
If you are running another type of software firewall (such as ZoneAlarm Pro, Norton Firewall, McAfee Firewall, BlackICE Defender, etc.),you may have to do something similar to allow inbound access on ports688x to the BitTorrent client (usually btdownloadgui.exe.)
For example, in Zone Alarm Pro, in the Program Listings, click on the program's name (btdownloadgui.exe) and then click the Optionsbutton and then enter the ports to use. If you're having troubleconnecting, you might try giving BitTorrent access to all ports.
To open ports in the Mac OS X firewall, do the following:

• Open System Preferences.
• Click Sharing.
• Select the Firewall tab.
• Click the New... button.
• Click the popup menu in the dialog that appears, and choose Other....
• In the Port Number, Range, or Series field, enter 6881-6999.
• In the Name field, enter BitTorrent (or any other identifying string.)
• Click OK.

Can I use a proxy server with BitTorrent?First, note that there are two types of connections that the BitTorrent program must make:

• Outbound HTTP connections to the tracker, usually on port 6969.
• Inbound and outbound connections to the peer machines, usually on port 6881 and up.

A web proxy can only be used for the first type of connection, sincethe second type is not HTTP. Theoretically, you could use the HTTP CONNECTcommand to tunnel them through an HTTP proxy, but this would requireadditional code support in the client. There is a possible workaroundfor this scenario, however; see the final point below.
That having been said, here is how to configure an HTTP proxy for the tracker connections:

• If the proxy does not require authorization, the system-wide proxy configuration should work. For Windows, open the Control Panel select Internet Options, click on the Connections tab, select your connection and click Settings... (or Lan Settings... if you have a direct connection.) Make sure the Use a proxy server option is selected and enter the proxy's address and port.
• If your proxy requires basic authorization, set the http_proxy environment variable to http://username:password@hostname:port, where username and password are your login and password, and hostname:portis the address and port of the proxy server. If you don't know how toset environment variables, there are instructions for Windows on this page by Mike Ravkine (krypt).
• If your proxy requires NTLM authorization (a Microsoft-proprietaryscheme), you may have to use a third party program. Fortunately thereis a utility called NTLM Authorization Proxy Server.It is a program you run on your local machine that acts as a proxy foryour proxy. In other words, it takes the (unauthenticated) proxyrequests from the application (BitTorrent) and forwards them on to yourorganization's proxy, adding the necessary NTLM authorization. It iswritten in Python and available as source, so you must install Pythonon your computer before running it. Refer to the home page for more information.
• If you are in a firewalled environment where NO outboundconnections are allowed except those through an HTTP proxy, you willhave difficulty using BitTorrent. One method which might work is asfollows: The desproxyprogram can serve as a SOCKS 4 or 5 server than tunnels requeststhrough the proxy server. Then use SocksCap to "socksify" (interceptthe network calls and redirect them to the SOCKS server) the BitTorrentprogram. See below for a few notes about SocksCap. Note: If you get this method to work, please report your steps and results so that I can improve this part of the FAQ. Thanks.

Ref: http://www.dessent.net/btfaq/#ports

[ 本帖最後由 jwlchan 於 20-11-2008 07:19 編輯 ]

---

作者: 101653    時間: 20-11-2008 20:45

引用:

原帖由 Pvt.King 於 20-11-2008 13:06 發表
好大可能係router無set番個port, 但隻隻router唔同, 好難教你點set, 我果個就係好似張圖咁(個service port係你個bitcomet d 選頂度應該有寫)

http://i113 ...

即係點set....唔明....
我搵到類似你呢頁....但唔知下一步....


btw....thx各位師兄

---

作者: 101653    時間: 20-11-2008 20:47

引用:

原帖由 Pvt.King 於 20-11-2008 13:14 發表
剛剛係utorrent果度睇左你個router, 你跟住呢個網set就應該ok
http://www.portforward.com/engli ... L-520G/BitComet.htm

大至上明明地....but要等叔父大人番黎先郁到佢部腦....
thx....

---

作者: zeta    時間: 20-11-2008 21:00

引用:

原帖由 gtoray 於 20-11-2008 15:08 發表


其實....真係有人用 bt 來散開工作 file 咩...?

D ONLINE GAME FILE E家好多都用BT架


BTW, TP-LINK有UPNP功能
開左之後唔駛SET PORT BT都行到

---

作者: Pvt.King    時間: 20-11-2008 21:06

講開呢個, 我都有問題想問
話說之前行雷打壞左我架router, 之後買過架同款既番來, 但用新呢個唔知點解, 我呀哥一用枱機打online game, 我用notebook個wifi就即斷, 佢alt-tab出番桌面我又上得番, 但一alt+tab番入game又斷, click連線就話"無法連線到xxxx", 以前果架都唔會... 會唔會係setting有問題? 因為之前係個fd幫我set, 呢次係我哥自己搞
Thanks

---

作者: derek_lok    時間: 21-11-2008 02:08

引用:

原帖由 gtoray 於 20-11-2008 15:08 發表


其實....真係有人用 bt 來散開工作 file 咩...?

大哥,,
刀可以用來殺人,,莫非家家戶戶都是殺人犯麼??

---

作者: louisli    時間: 21-11-2008 11:15

引用:

原帖由 Pvt.King 於 20-11-2008 21:06 發表
講開呢個, 我都有問題想問
話說之前行雷打壞左我架router, 之後買過架同款既番來, 但用新呢個唔知點解, 我呀哥一用枱機打online game, 我用notebook個wifi就即斷, 佢alt-tab出番桌面我又上得番, 但一alt+tab番 ...

有無定期 update firmware?

---

作者: Pvt.King    時間: 23-11-2008 20:45

引用:

原帖由 louisli 於 21-11-2008 11:15 發表

有無定期 update firmware?

剛剛update左再reset過router都係咁 我呀哥用枱機一入隻world of warcraft, 我notebook就斷線... 再連就話"無法連線到 eric"
同埋發現notebook一連, 枱機就彈句野出來話咩ip與系統上的另一乜野衝突... 但我除左notebook同枱機之外又無其他野用wifi啦, 連psp都無同router connect... 究竟咩事

我router果度係咁寫, 上面果個就我reset完router已經係度, 下面果個就係notebook來...


正常: (Router無SET password 只係要來試下會唔會係password果度有問題啫,平時會開)


枱機入左world of warcraft之後:


[ 本帖最後由 Pvt.King 於 23-11-2008 20:49 編輯 ]

---

作者: louisli    時間: 23-11-2008 22:34

哦，撞IP呀？
你部機係用router dhcp定係fixed ip?
入router dhcp page度搞一搞佢

---

作者: Pvt.King    時間: 23-11-2008 22:44

引用:

原帖由 louisli 於 23-11-2008 22:34 發表
哦，撞IP呀？
你部機係用router dhcp定係fixed ip?
入router dhcp page度搞一搞佢

Thanks so much, 但我都係唔知set邊個

同埋撞ip果句野都唔係下下連唔到線都會出,

Thanks again

---

作者: louisli    時間: 23-11-2008 23:02

引用:

原帖由 Pvt.King 於 23-11-2008 22:44 發表

Thanks so much, 但我都係唔知set邊個

同埋撞ip果句野都唔係下下連唔到線都會出,

Thanks again

default gateway同dns都係0.0.0.0?
定係你為左post上來先改左?

---

作者: Pvt.King    時間: 23-11-2008 23:06

引用:

原帖由 louisli 於 23-11-2008 23:02 發表

default gateway同dns都係0.0.0.0?
定係你為左post上來先改左?

無, 佢原本係咁, 我呢D電腦白痴都唔知果D乜野來, 邊敢改

[ 本帖最後由 Pvt.King 於 23-11-2008 23:08 編輯 ]

---

作者: louisli    時間: 24-11-2008 17:43

引用:

原帖由 Pvt.King 於 23-11-2008 23:06 發表

無, 佢原本係咁, 我呢D電腦白痴都唔知果D乜野來, 邊敢改

因為0.0.0.0 在網絡上解作"整個網絡"，我未試過咁樣set會有咩後果，但我估佢會令你成個網絡慢晒，呢個可能係原因
你可以將gateway同埋dns都設做你個router的ip，睇下有無改善

---

歡迎光臨 CGF (http://wargamehk.com/cgf/)

Powered by Discuz! 6.0.0