Board logo

標題: Base for a SPR [打印本頁]

作者: the.jaguar    時間: 26-1-2009 11:57     標題: Base for a SPR

I'm going to make a AEG SPR, base on a GP M4 which I'm going to buy.
These are the M4s that I'm thinking about:
http://www.dentrinityshop.com/pr_details.jsp?pid=13631
http://www.dentrinityshop.com/pr_details.jsp?pid=12343
http://www.dentrinityshop.com/pr_details.jsp?pid=11944
http://www.dentrinityshop.com/pr_details.jsp?pid=11703
They come in especially cheaper than other GP M4s, are there any internal difference?
Thanks

p.s. More importantly, I'd like to know if these M4s can use 11.1V 1300mAh 12C Lithium Battery and 1400mAh 9.6V / 10.8V battery.

[ 本帖最後由 the.jaguar 於 26-1-2009 12:08 編輯 ]
作者: sunny2014    時間: 26-1-2009 14:36

http://www.dentrinityshop.com/pr_details.jsp?pid=12067
http://www.dentrinityshop.com/pr_details.jsp?pid=7429

[ 本帖最後由 sunny2014 於 26-1-2009 14:38 編輯 ]
作者: Elf    時間: 26-1-2009 15:20

why dont u just buy SPR made by G&P?
作者: the.jaguar    時間: 26-1-2009 23:42

I think it is more expensive, because I want the standard m4 stock and grip.

[ 本帖最後由 the.jaguar 於 27-1-2009 00:55 編輯 ]
作者: kerr    時間: 27-1-2009 18:02

我英文唔好,所以用中文
我而家都做緊同一樣野,我想問你想整邊隻既spr頭膽?
作者: sunny2014    時間: 27-1-2009 18:24

引用:
原帖由 the.jaguar 於 26-1-2009 23:42 發表
I think it is more expensive, because I want the standard m4 stock and grip.
用M4A1改SPR要買前節同內管(可能連氣缸都要換)
呢枝SPR改你想要既野只需換手柄
你話邊樣買少D料?




歡迎光臨 CGF (http://wargamehk.com/cgf/) Powered by Discuz! 6.0.0