CGF - Powered by Discuz! Board

標題: Mixing 134a and Top Gas for GnP GBB [打印本頁]

作者: jcahmaens 時間: 25-3-2009 22:14 標題: Mixing 134a and Top Gas for GnP GBB

I have a GnP GBB and the power of using Top Gas is at least 罐底.... and using 134a is quite marginal. I wonder if it is possible to mix Top Gas with 134a to have the power in between? I have tried to do it like putting in some top gas and fill up the whole mag with 134a gas... it shoots around 2-side power for the first few rounds but all gas runs out after 6 rounds... (it can shoot full 30 to 50 rounds without problem if i just use pure Top Gas or pure 134a)... does it mean it is not possible to mix them? anyone tried? thanks.

作者: the.jaguar 時間: 26-3-2009 00:16

I'm not an expert or anything, but common sense tells me you're gonna blow your face next time you pull the trigger

作者: Dominic 時間: 26-3-2009 17:02

you should put in 134a gas before top gas as top gas has a higher pressure

let the mag warm up a bit before shooting also helps

作者: jabberwock624 時間: 26-3-2009 23:13

引用:

原帖由 jcahmaens 於 25-3-2009 22:14 發表
I have a GnP GBB and the power of using Top Gas is at least 罐底.... and using 134a is quite marginal. I wonder if it is possible to mix Top Gas with 134a to have the power in between? I have tried to ...

請問師兄買0左邊個MODEL No.

作者: jcahmaens 時間: 26-3-2009 23:42

Thanks for the advise... will try a bit....

I got G&P CQB (WOC 14)

歡迎光臨 CGF (http://wargamehk.com/cgf/)