CGF - Powered by Discuz! Board

標題: GLR 17 Quick-release Removable stock [打印本頁]

作者: Mathew 時間: 8-4-2009 00:02 標題: GLR 17 Quick-release Removable stock

小朋友早前手多多，拜託友人幫助搞左呢舊野返黎...
來自以色列，購自"依悲"
已經係舊事物，相信好多師兄都知咩黎

所以想問問有無師兄都擁有呢件怪野？
以前打game見過有師兄用過，當時問過marui既GLOCK17唔執都裝到...
小朋友用ksc既，到手先發現要執位先用到
有無師兄試過，用過，又執過既，可以貼一貼相俾小弟參考嗎？

圖片附件: SANY0506_resize.JPG (8-4-2009 00:02, 43.69 KB) / 該附件被下載次數 111
http://wargamehk.com/cgf/attachment.php?aid=70652

圖片附件: SANY0508_resize.JPG (8-4-2009 00:02, 36.23 KB) / 該附件被下載次數 129
http://wargamehk.com/cgf/attachment.php?aid=70653

圖片附件: SANY0509_resize.JPG (8-4-2009 00:02, 43.22 KB) / 該附件被下載次數 139
http://wargamehk.com/cgf/attachment.php?aid=70654

圖片附件: SANY0515_resize.JPG (8-4-2009 00:02, 44.63 KB) / 該附件被下載次數 120
http://wargamehk.com/cgf/attachment.php?aid=70655

作者: bigdick 時間: 8-4-2009 12:41

I modified the stock on my 1st gen KSC 18C, trim down the leg insert of the stock, open a hole on the Glock's grip so that the locking lug can goes in the grip (don't know if the KSC 17 has the hole or not)

作者: Mathew 時間: 8-4-2009 15:59

師兄連棍仔都加埋

其實自己都大約知點執
不過想睇下有無師兄可以分享下執完既樣
最怕執過龍........變到lock唔實

作者: Hkpolice-Psu 時間: 8-4-2009 16:05

我記得好似有個mount係mount隻匣去前面, 好似咁樣會好睇d??

作者: bigdick 時間: 8-4-2009 18:20

引用:

原帖由 Mathew 於 8-4-2009 15:59 發表
師兄連棍仔都加埋
其實自己都大約知點執
不過想睇下有無師兄可以分享下執完既樣
最怕執過龍........變到lock唔實

It is very difficult to say how much you need to trim due to the shape of the channel in the grip, I spent around one day to get it done, bit by bit and patience. Lucky that I have a Dremel which make my life easier...

作者: bigdick 時間: 8-4-2009 18:56

引用:

原帖由 Hkpolice-Psu 於 8-4-2009 16:05 發表
我記得好似有個mount係mount隻匣去前面, 好似咁樣會好睇d??

yes, there is, you need to replace the original mag base

作者: katotaka 時間: 8-4-2009 23:35

引用:

原帖由 bigdick 於 8-4-2009 12:41 發表
I modified the stock on my 1st gen KSC 18C, trim down the leg insert of the stock, open a hole on the Glock's grip so that the locking lug can goes in the grip (don't know if the KSC 17 has the hole o ...

估唔到呢款摺棍原來係 fit Glock 架喎