CGF - Powered by Discuz! Board

標題: my signature gun [打印本頁]

作者: zachary 時間: 8-9-2009 15:34 標題: my signature gun

可能大家都冇咩見過實物...我都未見過...不過睇相就好吸引...
叫G18 PDW?唔知...只知係HEPA ARMS出KIT...

http://www.hera-arms.com/gcc.php
真KIT 網

由於一直都唸唔到"M字頭" 枝摺槍點整...

所以放棄左...

之後就著手攪呢枝喇..

而家做定個SIZE同樣板先..

圖片附件: large_002.jpg (8-9-2009 15:34, 52.21 KB) / 該附件被下載次數 76
http://wargamehk.com/cgf/attachment.php?aid=85267

圖片附件: 1.JPG (8-9-2009 15:34, 119.74 KB) / 該附件被下載次數 67
http://wargamehk.com/cgf/attachment.php?aid=85268

圖片附件: RIGHT.JPG (8-9-2009 15:34, 97.64 KB) / 該附件被下載次數 70
http://wargamehk.com/cgf/attachment.php?aid=85269

圖片附件: STOCK.JPG (8-9-2009 15:34, 79.29 KB) / 該附件被下載次數 74
http://wargamehk.com/cgf/attachment.php?aid=85270

圖片附件: STOCK LOCK.JPG (8-9-2009 15:34, 83.25 KB) / 該附件被下載次數 85
http://wargamehk.com/cgf/attachment.php?aid=85271

作者: ayaka 時間: 8-9-2009 16:03

用鋁片屈個身??
ps. 咁熟ge支glock

作者: zachary 時間: 8-9-2009 16:05

PAPER WORK黎JA WOR...
下一步用膠板...

作者: ayaka 時間: 8-9-2009 16:07

哦....唔怪得你要哥羅芳la

作者: -l- 時間: 8-9-2009 16:16

It is quite hard to DIY the FMG-9
I think Mcpull got thier idea from M-21smg and PP-90 and give it a better out look.
http://world.guns.ru/smg/smg70-e.htm
http://world.guns.ru/smg/smg10-e.htm
Even the hand grip needed to be folded in, if any one really need to mod one for themselves I think Marui's extreme.45 is a better platfrom. Since the Hi-cap system's lower fram is 2 parts.

作者: noveske 時間: 8-9-2009 16:26

紙皮槍???!!!

算啦! 好難造到同真甘靚.....有小小耐性慢慢等PTS 出啦

作者: zachary 時間: 8-9-2009 16:47 標題: 回覆 4# 的帖子

我得「溶膠水」ja拿....

作者: zachary 時間: 8-9-2009 16:59 標題: 回覆 5# 的帖子

thx ching first
those info and data is very useful
but i am not trying to copy the FMG-9
FMG-9 is looking for convenient
mine one is looking for increasing consistancy of pistol during CQB
although I hv enough design idea to build FMG,
I love this one more!

作者: noveske 時間: 8-9-2009 17:36

What materials are you planning to use? PVC?

作者: NARUSEGAWA 時間: 8-9-2009 23:34

支槍好得wo~

特別是個會摺的前手柄

作者: zachary 時間: 8-9-2009 23:59

引用:

原帖由 noveske 於 8-9-2009 17:36 發表
What materials are you planning to use? PVC?

YEAH

作者: noveske 時間: 9-9-2009 10:17

I am afraid your PVC will flex and break quite easily. Probably better to use plexi/acrylic at least 3mm thick.

作者: zachary 時間: 9-9-2009 10:45 標題: 回覆 12# 的帖子

多謝師兄提醒....
係咪姐係"亞加力"膠板 3mm?