Board logo

標題: 唐x九的『M203 小型榴彈發射器 』 [打印本頁]

作者: Rubbish-Nec    時間: 13-5-2010 22:18     標題: 唐x九的『M203 小型榴彈發射器 』



大概是這樣子……

請問可不可以掛在RIS上?

還有射擊方法是……?

感謝

[ 本帖最後由 Rubbish-Nec 於 13-5-2010 22:21 編輯 ]
作者: coke    時間: 13-5-2010 22:43



咩黎架- -
作者: LesterCPY    時間: 13-5-2010 22:46

我懷疑緊係咪真係用到
作者: Hkpolice-Psu    時間: 13-5-2010 23:05

應該係抄蚊牌果隻mini luncher?
作者: 蛇    時間: 13-5-2010 23:05

抄蚊牌.
作者: khkenny2    時間: 13-5-2010 23:17

引用:
原帖由 Hkpolice-Psu 於 13-5-2010 11:05 PM 發表
應該係抄蚊牌果隻mini luncher?
9成係啦...
作者: Rubbish-Nec    時間: 13-5-2010 23:19

那射擊方法是……?
作者: 蛇    時間: 13-5-2010 23:48

引用:
原帖由 Rubbish-Nec 於 2010-5-13 23:19 發表
那射擊方法是……?
Mosquito Molds M203 Mini Launcher with 168rd Shell           
        
For installation onto an RIS rail, Glock rail frame, or even the MK23 rail frame, this mini-launcher is the perfect solution. Constructed of metal, the launcher attaches to any rail through two pressure clamps secured by hex-wrenches (not included, we recommend you buy "G&P 12 In One Precision Screwdrives for Airsoft Gun". RIS rails on the side of the launcher allow attaching additional accessories. The 180 BB shell is included and is removable for loading. A button on the back of the launcher allows you to unleash a rain of BB's on your opponents! The shell can be used in the CAW M79 and Sun Project M203 grenade launcher. This unit works great when installed on a TM MP5 RAS or AK Spetsnaz! Rails are so adjustable that you can even fit this on an MK23 pistol or a Glock (though it makes the gun extremely front heavy of course!) A special note to buyers: NEVER disassemble this unit as reassembly is a nightmare requiring alignment of multiple delicately positioned ball bearings!

All you need is gas and BBs to start using this launcher since the shell is included as part of the launcher already. Able to handle HFC22 or even more powerful red gas. If you find loading so many BBs to be a horrible pain, then consider getting the MOSCART loading tool from our accessories section.
作者: Rubbish-Nec    時間: 14-5-2010 00:02

這樣BB彈會更散?

還有M203的長砲管只是純仿真?
作者: LesterCPY    時間: 14-5-2010 00:02

引用:
原帖由 於 13-5-2010 23:48 發表

Mosquito Molds M203 Mini Launcher with 168rd Shell           
        
For installation onto an RIS rail, Glock rail frame, or even the MK23 rail frame, this mini-launcher is the perfect solution. ...
幾方便wo
作者: 蛇    時間: 14-5-2010 00:30

引用:
原帖由 Rubbish-Nec 於 2010-5-14 00:02 發表
這樣BB彈會更散?

還有M203的長砲管只是純仿真?
你以為係點..?
作者: Rubbish-Nec    時間: 14-5-2010 19:40

引用:
原帖由 於 2010-5-14 00:30 發表

你以為係點..?
也許射某些軟膠榴彈會比較好吧
作者: Pan    時間: 14-5-2010 20:58

引用:
原帖由 Hkpolice-Psu 於 13-5-2010 23:05 發表
應該係抄蚊牌果隻mini luncher?
五六年前既野都炒@@
作者: 蛇    時間: 14-5-2010 22:21

引用:
原帖由 Rubbish-Nec 於 2010-5-14 19:40 發表


也許射某些軟膠榴彈會比較好吧
你係咁 想點呢?
作者: Rubbish-Nec    時間: 14-5-2010 22:26

引用:
原帖由 於 2010-5-14 22:21 發表

你係咁 想點呢?
純好玩吧
作者: ayaka    時間: 14-5-2010 23:15

引用:
原帖由 Rubbish-Nec 於 14-5-2010 19:40 發表


也許射某些軟膠榴彈會比較好吧
軟膠邊夠好玩
作者: Rubbish-Nec    時間: 15-5-2010 00:24

引用:
原帖由 ayaka 於 2010-5-14 23:15 發表

軟膠邊夠好玩
用硬的??
作者: coke    時間: 15-5-2010 02:40

硬既好! 射下D硬膠人




歡迎光臨 CGF (http://wargamehk.com/cgf/) Powered by Discuz! 6.0.0