Board logo

標題: [認真] 電腦高手請入 [打印本頁]

作者: 豬肥    時間: 29-5-2010 14:14     標題: 電腦高手請入

話說小弟買左個新mon
1插,1開電腦,就有個pop up叫我轉個resolution去1980x1020
好啦轉左..成個野好睇左好多
但係唔知點解個screen右邊既野被cut去!
有無師兄提供solution?
作者: sam524    時間: 29-5-2010 14:19

係唔係用三星mon呢...
好似冇得搞嫁WOR...
作者: 豬肥    時間: 29-5-2010 14:24

我係用viewsonic
作者: m82a1m40a1    時間: 29-5-2010 14:25

有冇auto一次個mon?
作者: 豬肥    時間: 29-5-2010 14:28

auto adjust?
如果係既應該有
作者: m82a1m40a1    時間: 29-5-2010 14:33

引用:
原帖由 豬肥 於 29-5-2010 14:28 發表
auto adjust?
如果係既應該有
用dvi or hdmi定vga?
作者: 莊家-犯罪無間    時間: 29-5-2010 14:42

你用一個mon 定2個mon??
作者: 豬肥    時間: 29-5-2010 16:47

vga
用緊1個mon
作者: 莊家-犯罪無間    時間: 29-5-2010 17:34

可能係VGA谷唔到上1920x1080 60hz
作者: 豬肥    時間: 29-5-2010 17:42

想用1920x1080

mon有hdmi頭但係部腦無..
this means玩唔到1920x1080?
作者: 莊家-犯罪無間    時間: 29-5-2010 17:48

引用:
原帖由 豬肥 於 29-5-2010 17:42 發表
想用1920x1080

mon有hdmi頭但係部腦無..
this means玩唔到1920x1080?
DVI頭都可以上1920x1080
作者: 豬肥    時間: 29-5-2010 18:42

其實關唔關電腦個spec.事?
作者: lamwk00    時間: 29-5-2010 18:44     標題: 回覆 12# 的帖子

主要係關 Display 事
作者: martinmhk    時間: 29-5-2010 18:44

可能係 display >>soft 問題,..但要auto adjust左先知..
唔得再影相post出來..
作者: 豬肥    時間: 29-5-2010 18:49

引用:
原帖由 lamwk00 於 29-5-2010 18:44 發表
主要係關 Display 事
我張display係ge force 7025..
on board的
作者: CWHS    時間: 29-5-2010 19:00

引用:
原帖由 豬肥 於 29-5-2010 18:42 發表
其實關唔關電腦個spec.事?
Due to bandwidth issue by connector
Max resolution shown as follow
D-Sub 2048x1536
DVI Single Link 1920 × 1200
DVI Dual Link 2560 × 1600

The solution for your problem, simply just change to DVI connector or just click AUTO ADJUST on your monitor. If the problem didn't solve, that mean your VGA driver wasn't function properly, just go the the manufacturing site(ATI, Nvidia, VIA, SIS, Intel) to update your VGA Driver.

[ 本帖最後由 CWHS 於 29-5-2010 19:01 編輯 ]
作者: 豬肥    時間: 29-5-2010 19:22

simply just change to DVI connector???how?
auto adjust左好多好多次,右邊既野都係無左
作者: louisli    時間: 29-5-2010 20:04

較錯resolution?
個mon最高行幾多架?
作者: 豬肥    時間: 29-5-2010 20:26

我而家係1680x1050
個mon/要check check
但係佢話support full HD
作者: 莊家-犯罪無間    時間: 29-5-2010 20:48

引用:
原帖由 豬肥 於 29-5-2010 20:26 發表
我而家係1680x1050
個mon/要check check
但係佢話support full HD
你個display谷唔到上去係無用ga
作者: 豬肥    時間: 29-5-2010 20:55

即是display太垃圾故上唔到?
作者: 莊家-犯罪無間    時間: 29-5-2010 21:05

引用:
原帖由 豬肥 於 29-5-2010 20:55 發表
即是display太垃圾故上唔到?
唔排除係
作者: CWHS    時間: 29-5-2010 21:15

引用:
原帖由 莊家-犯罪無間 於 29-5-2010 21:05 發表

唔排除係
He already said his onboard VGA is GF7025, absolutely capable to run Full HD+.
As i said just change to DVI will do, otherwise maybe driver issue.
作者: 莊家-犯罪無間    時間: 29-5-2010 21:19

引用:
原帖由 CWHS 於 29-5-2010 21:15 發表

He already said his onboard VGA is GF7025, absolutely capable to run Full HD+.
As i said just change to DVI will do, otherwise maybe driver issue.
電腦的問題好難講,撞左d咩,有時真係估唔到
作者: ++朗++    時間: 30-5-2010 04:15

買張display card啦
好可能因為佢頂唔到
即使唔關佢事
比你用到full HD都唔會順得去邊啦
無謂咁虐待部機
作者: CWHS    時間: 30-5-2010 15:47

引用:
原帖由 莊家-犯罪無間 於 29-5-2010 21:19 發表

電腦的問題好難講,撞左d咩,有時真係估唔到
That was just basically signal and driver, it's rarely to 撞.
This problem is common on D-Sub, as i said just change to DVI.
引用:
原帖由 ++朗++ 於 30-5-2010 04:15 發表
買張display card啦
好可能因為佢頂唔到
即使唔關佢事
比你用到full HD都唔會順得去邊啦
無謂咁虐待部機
That was a common wrong idea for most people, for 2D task it's way more than enough to run, Full HD (1920 x 1080 x 32 / 8), for core certainly no problem, for VRAM it will only require 7.91MB.
And there are no such thing of "都唔會順得去邊啦"and"咁虐待部機"
How about if i tell u a 1999 TNT2 32MB can run smooth on 2048 x 1536, which is the restriction by D-Sub.

[ 本帖最後由 CWHS 於 30-5-2010 15:49 編輯 ]
作者: 豬肥    時間: 30-5-2010 22:22

我check話我張motherboard係無dvi port
係咪加張有dvi頭既display card就ok?
作者: ++朗++    時間: 31-5-2010 01:07

引用:
原帖由 CWHS 於 30-5-2010 15:47 發表

That was just basically signal and driver, it's rarely to 撞.
This problem is common on D-Sub, as i said just change to DVI.

That was a common wrong idea for most people, for 2D task it's way mo ...
佢用on board display card
用到上full hd
一開game我就唔信佢會行得順
我唔係話行唔到
日常咁用當然冇咩問題啦
但係如果佢行D用好多display card資源GA野
on board就好大機會頂唔順
既然加張卡都唔係好貴
點解要用到部機咁盡呢?
作者: CWHS    時間: 31-5-2010 11:50

引用:
原帖由 豬肥 於 30-5-2010 22:22 發表
我check話我張motherboard係無dvi port
係咪加張有dvi頭既display card就ok?
So did u try update the driver first? or did u see a HDMI port on MB?
引用:
原帖由 ++朗++ 於 31-5-2010 01:07 發表

佢用on board display card
用到上full hd
一開game我就唔信佢會行得順
我唔係話行唔到
日常咁用當然冇咩問題啦
但係如果佢行D用好多display card資源GA野
on board就好大機會頂唔順
既然加張卡都唔係好貴
...
In this case 7025 won't "running" any kind of 3D game in this 3years(at least) in Full HD.
So it doesn't matter the core will sustain a lot, in additional "用到部機咁盡" even if u using a external card. You will still using your core resource, so there are no such "用到部機咁盡" thing.
作者: 亞爾多    時間: 31-5-2010 19:23

引用:
原帖由 ++朗++ 於 31-5-2010 01:07 發表

佢用on board display card
用到上full hd
一開game我就唔信佢會行得順
我唔係話行唔到
日常咁用當然冇咩問題啦
但係如果佢行D用好多display card資源GA野
on board就好大機會頂唔順
既然加張卡都唔係好貴
...
人地有話用黎打機咩?
作者: 豬肥    時間: 31-5-2010 19:23

no HDMI port on the motherboard..




歡迎光臨 CGF (http://wargamehk.com/cgf/) Powered by Discuz! 6.0.0