CGF - Powered by Discuz! Board

標題: [WE] WE M16VN GBB Rifle (Open Chamber) [打印本頁]

作者: wing383 時間: 19-5-2011 10:40 標題: WE M16VN GBB Rifle (Open Chamber)

http://shop.ehobbyasia.com/other ... e-open-chamber.html

anyone bought already??? longing for the user report, thx!!!!

作者: skynet1983 時間: 19-5-2011 11:07

mk 各大地方都有售...

作者: rho837 時間: 19-5-2011 12:12

其實大家有冇乜野 Idea (健議)去通一叫(WA出先M16 GBBR系统 )名詞! 因為以前好簡單叫WA系统或WE系统或Copper-tube system (銅膽系统 ), Open-bolt system (開放式系统 ) , 但因WE出了同WA同類既系统, 防止混亂邊隻牌仔邊間廠出既系统.......等大家清楚.

講M16; AR15; M4 and the like (SR25; M110..... )

GBBR = Gas Blow Back Rifle (Blow-back槍 )

真槍: Bolt + Firing pin + Bolt carrier (AR system - AR系统 )
WE GBBR First Generation (Copper-tube system - 銅膽系统 ); (AWSS Sytem - AWSS系统 )
WA & WE GBBR First Generation (AR alike system - 仿AR系統 )

Make it simple for M16, AR15 and the like GBBR airsoft:-
1) WE GBBR first generation (WE第一代銅膽起 ) 叫 AWSS
2) WA & WE first generation so-called open-bolt whatever (WA及同類系统 ) 叫 AR-bolt

應該好簡單好清楚, 一講AWSS就知係WE銅膽系统, 一講AR-bolt就知係WA及同類係统.

大家點睇?

因為open bolt ; open chamber 唔咪GBBR AR alike Bolt & Bolt carrier今解!

[ 本帖最後由 rho837 於 19-5-2011 19:35 編輯 ]

作者: rYaN 時間: 19-5-2011 14:37

OB (OPEN BOLT)咪得囉..洗鬼噤煩呀?
一講OB都知係講WE啦

作者: rho837 時間: 19-5-2011 19:32

2. 鎗把 stock of gun.
4. 鎗桿 (1) gun barrel; (2) gen. term for rifle (cf. 筆桿writing brush, the pen).
5. 鎗口 gun muzzle.
7. 鎗身 gun barrel.
8. 鎗手 gunman; substitute writer (exam.).
9. 鎗膛 gun barrel.
11. 鎗托 gun stock.
12. 鎗筒 gun barrel.
14. 鎗眼 (1) gun hole (for firing, or made by bullet); (2) gun muzzle.

OPEN BOLT

Open = 開
Bolt = 栓塞, 閂, 轟擊栓, 轟擊閂, 槍閂, 槍栓, 鎗膛轟擊栓...........

所以實察上open bolt (GBBR) 唔知講乜春!

所以我唔會講open bolt! 唔會比人笑我英文水平底B.......

Never heard people call typical real AR-15 system open bolt!

[ 本帖最後由 rho837 於 20-5-2011 09:22 編輯 ]

作者: hung 時間: 19-5-2011 20:00

WE以前銅胆行橡筋拉BOLT片 , 而家因適應環境下改用WA系列方式 , 所以為扣人心懸咪改過OPEN BOLT之特別稱呼 , 等客人們難以忘記 , 哈哈 ! ( 講吓笑勿生氣 )

作者: timchung2007 時間: 19-5-2011 20:22

引用:

原帖由 rho837 於 19-5-2011 19:32 發表
2. 鎗把 stock of gun.
4. 鎗桿 (1) gun barrel; (2) gen. term for rifle (cf. 筆桿writing brush, the pen).
5. 鎗口 gun muzzle.
7. 鎗身 gun barrel.
8. 鎗手 gunman; substitute writer (exam.).
9. 鎗膛 ...

Open bolt do exist in real firearms. M249 and other machine guns are mostly open bolt.
英文水平底B

作者: hwwong 時間: 19-5-2011 22:15

引用:

原帖由 timchung2007 於 19-5-2011 20:22 發表

Open bolt do exist in real firearms. M249 and other machine guns are mostly open bolt.
英文水平底B

係呀真鐵既open bolt 同gbb既 open bolt 完全係兩回事....

作者: nishi 時間: 19-5-2011 22:27

如果淨講汽槍...根本都唔洗分...wa系列一開始已經係全開膛,
係得we有分ob同銅膽...

作者: timchung2007 時間: 20-5-2011 07:34

引用:

原帖由 hwwong 於 19-5-2011 22:15 發表

係呀真鐵既open bolt 同gbb既 open bolt 完全係兩回事....

WE is quite confusing ：D The Maruzen mp5 is really 'open bolt'

作者: sunny2014 時間: 20-5-2011 07:51

叫「銅膽版」同「無膽版」大家點睇？

作者: rho837 時間: 20-5-2011 11:50

引用:

原帖由 timchung2007 於 19-5-2011 20:22 發表

Open bolt do exist in real firearms. M249 and other machine guns are mostly open bolt.
英文水平底B

喂! 個TOPIC係講掔一般真AR-15同WA & WE GBBR, Open-bolt or slam-fire 在其他machine guns倒掔係明啦, 所以我咪話如果對一般人講WA或新WE個M16, AR-15, M4 GBBR係open-bolt就真係有小小誤解???????唔知講 " 乜春 " ! 嗱 ! 你都明白open-bolt在machine gun個定議, 啲人叫支GBBR係open-bolt係咪有小小英文...B先!

所以用個新名代open-bolt係應該! 乜名比交好? Simple existing WA & WA clone are called WA. WE AWSS call WE and new WE(so called open-bolt)just call WEWA! 夠簡單嗎!

其實唔難理解叫WA GBBR做open-bolt! 因為WE有銅膽冇左啲空位, 而WA仿AR-15有空位隻手指插得入個chamber處! 又同時雙方都係有支bolt carrier, WA叫open-bolt就係一般香港英文叫法, 但係open-bolt以經一早有定議, 所以玩GBBR玩應該用其他名取代open-bolt.

Note: Typical AR-15 not included LWRCI LAR and the like.

[ 本帖最後由 rho837 於 20-5-2011 11:59 編輯 ]

作者: rho837 時間: 21-5-2011 14:31

Now I start to like the YYE AR-bolt system

http://www.youtube.com/watch?v=9r7YZKt8Fiw

Looking at the clip! It feels very smooth and stable and you can hear every BBs hitting sound. This new YYE GBBR give me one more try. Eventhough if YYA revised and further improve their system similar or better than YYE AR-bolt system I still stick with YYE as their mags filled the rest of the marks adding up 99%.

作者: DENON 時間: 21-5-2011 20:21

我又講兩句先:
話比大家知新版唔可以改做銅膽
要改就一定要落機做(因size唔同)
做版上身個槍管座細D
可能你會問邊有人會走番轉頭玩銅膽
我就係其中一個

[ 本帖最後由 DENON 於 22-5-2011 01:07 編輯 ]

作者: N_G 時間: 22-5-2011 00:19

引用:

原帖由 DENON 於 21-5-2011 20:21 發表
我又講兩句先:
話比大家知新版唔可以改做銅膽
要改就一定要落機做(因size唔同)
做版上身個槍管坐細D
可能你會問邊有人會走番轉頭玩銅膽
我就係其中一個
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/24959 ...

姐係上身唔共用

作者: DENON 時間: 22-5-2011 00:43

引用:

原帖由 N_G 於 22-5-2011 00:19 發表

姐係上身唔共用

No!No!No!
舊版上身只要加多一零件就可以成為無膽之士(呢個vve好大機會跟kit出)
而新版上身除非改大上身洞or改細槍管座就可成為有膽之士(呢個vve彩你都傻)

作者: hin_1213 時間: 22-5-2011 00:48

師兄有咩原因花咁大工程玩返銅膽?

作者: DENON 時間: 22-5-2011 00:56

引用:

原帖由 hin_1213 於 22-5-2011 00:48 發表
師兄有咩原因花咁大工程玩返銅膽?

穩定、耐用、高性能

作者: rho837 時間: 22-5-2011 18:17

引用:

原帖由 DENON 於 22-5-2011 00:56 發表

穩定、耐用、高性能

真係Likey你講呢句話

歡迎光臨 CGF (http://wargamehk.com/cgf/)