CGF - Powered by Discuz! Board

標題: Kar.98K Mauser [打印本頁]

作者: MANKF 時間: 27-5-2011 12:46 標題: Kar.98K Mauser

近來儲咗好多Kar.98K 嘅parts，同剛啱番咗個木托，想整番支跟真數嘅model gun！最底限度個玩具receive可以落到個真托！請各C-Hing大大提點指教邊個玩具牌子fit到真數！ Thank you

圖片附件: $(KGrHqIOKjYE2KBR1t72BNllr(nqKw~~_3.jpg (27-5-2011 12:46, 25.31 KB) / 該附件被下載次數 97
http://wargamehk.com/cgf/attachment.php?aid=134543

圖片附件: $(KGrHqMOKowE1z-YTje1BNllsN8twQ~~_3.jpg (27-5-2011 12:46, 50.57 KB) / 該附件被下載次數 107
http://wargamehk.com/cgf/attachment.php?aid=134544

作者: ndl 時間: 27-5-2011 12:48

當cap 定打氣?

cmc果個receiver 好似唔錯的
聽聞佢有一版係鋼定唔知鐵的

作者: ndl 時間: 27-5-2011 12:49

儲字數....

[ 本帖最後由 ndl 於 18-6-2011 20:40 編輯 ]

作者: MANKF 時間: 27-5-2011 13:08 標題: 回覆 3# 的帖子

Andy哥你好！真係CMC，我都心裡有數

記得係台灣網啲C-Hing都講過！而我上次支CMC M1 carbine都落到真木托！但唔知其它parts又如何？

圖片附件: $(KGrHqEOKicE14+k5cOPBNllYuk1q!~~_3.jpg (27-5-2011 13:08, 64.33 KB) / 該附件被下載次數 91
http://wargamehk.com/cgf/attachment.php?aid=134545

圖片附件: $(KGrHqIOKocE12TZ4GqbBNllBlFjSw~~_3.jpg (27-5-2011 13:08, 68.76 KB) / 該附件被下載次數 101
http://wargamehk.com/cgf/attachment.php?aid=134546

圖片附件: $(KGrHqUOKn!E1S)vR130BNllefD4CQ~~_3.jpg (27-5-2011 13:08, 69.91 KB) / 該附件被下載次數 107
http://wargamehk.com/cgf/attachment.php?aid=134547

圖片附件: $(KGrHqUOKooE1z2kNsmbBNllBWdNsw~~_3.jpg (27-5-2011 13:08, 41.84 KB) / 該附件被下載次數 103
http://wargamehk.com/cgf/attachment.php?aid=134548

作者: ndl 時間: 27-5-2011 13:30 標題: 回覆 4# 的帖子

MAN哥你好
之前聽個fd講cmc有幾版
但數無咩改,係材料改

d parts ...

作者: MANKF 時間: 27-5-2011 14:07 標題: 回覆 5# 的帖子

ndl哥你好！其實我淨係要CMC個receive最多要埋個bolt，因為呢啲嘢係唔應該入嘅！

另外啲parts都係有marking同nos.嘅好

圖片附件: $(KGrHqEOKjEE140JI26zBNllbVYE3!~~_3.jpg (27-5-2011 14:07, 39.75 KB) / 該附件被下載次數 117
http://wargamehk.com/cgf/attachment.php?aid=134550

圖片附件: $(KGrHqMOKjEE17SS4ZU+BNllbmpVqg~~_3.jpg (27-5-2011 14:07, 62.39 KB) / 該附件被下載次數 107
http://wargamehk.com/cgf/attachment.php?aid=134551

圖片附件: $(KGrHqIOKi4E1cevEDJzBNllMm0tSQ~~_3.jpg (27-5-2011 14:07, 59.66 KB) / 該附件被下載次數 103
http://wargamehk.com/cgf/attachment.php?aid=134552

圖片附件: $(KGrHqUOKisE17Eiqgd,BNllWhZEfw~~_3.jpg (27-5-2011 14:07, 77.87 KB) / 該附件被下載次數 97
http://wargamehk.com/cgf/attachment.php?aid=134553

圖片附件: $(KGrHqIOKpUE1qbttyHHBNllW0Jk!Q~~_3.jpg (27-5-2011 14:07, 74.66 KB) / 該附件被下載次數 115
http://wargamehk.com/cgf/attachment.php?aid=134554

作者: Natrium 時間: 17-6-2011 18:13

Can you show me some more photos (markings) of the stock?
Currently studing on 98k stock but yours doesn't seems like laminated nor walnut stock. but beechwood

作者: MANKF 時間: 17-6-2011 19:47 標題: 回覆 7# 的帖子

I think this wood stock was long time not under correct storage and the rear part may even long time under the sun. However, the front part can still find some laminated. However, the whole wood stock need to rework and laminated once again. By the way, I have ordered another woodstock for K98K which is a walnut once. See photos

圖片附件: $(KGrHqEOKjsE1l8pmYiwBNllrvwbRg~~_3.jpg (17-6-2011 19:47, 113.24 KB) / 該附件被下載次數 91
http://wargamehk.com/cgf/attachment.php?aid=136667

圖片附件: $(KGrHqMOKogE1z1gzewJBNllr-Yp5!~~_3.jpg (17-6-2011 19:47, 107.1 KB) / 該附件被下載次數 91
http://wargamehk.com/cgf/attachment.php?aid=136668

圖片附件: $(KGrHqQOKocE12I4Zk5zBNllrgKsVg~~_3.jpg (17-6-2011 19:47, 51.91 KB) / 該附件被下載次數 84
http://wargamehk.com/cgf/attachment.php?aid=136669

圖片附件: $(KGrHqQOKpsE1q+LnF0EBNllrzf8Cw~~_3.jpg (17-6-2011 19:47, 71.45 KB) / 該附件被下載次數 95
http://wargamehk.com/cgf/attachment.php?aid=136670

圖片附件: $(KGrHqYOKnME1Up75JdtBNllsF7hYw~~_3.jpg (17-6-2011 19:47, 92.89 KB) / 該附件被下載次數 100
http://wargamehk.com/cgf/attachment.php?aid=136671

圖片附件: Stock 1.jpg (17-6-2011 19:47, 22.98 KB) / 該附件被下載次數 90
http://wargamehk.com/cgf/attachment.php?aid=136672

圖片附件: Stock 4.jpg (17-6-2011 19:47, 55.85 KB) / 該附件被下載次數 83
http://wargamehk.com/cgf/attachment.php?aid=136673

作者: yiuyiusiu 時間: 17-6-2011 20:04

隻鷹marking 又難搵又貴

作者: MANKF 時間: 17-6-2011 20:27 標題: 回覆 9# 的帖子

啲鷹遂粒執，都真係幾係嘢

圖片附件: $(KGrHqEOKjUE10M(RLo6BNllGS25E!~~_3.jpg (17-6-2011 20:27, 105.16 KB) / 該附件被下載次數 97
http://wargamehk.com/cgf/attachment.php?aid=136674

圖片附件: $(KGrHqEOKkEE1s(92k--BNllBtt-+Q~~_3.jpg (17-6-2011 20:27, 104.77 KB) / 該附件被下載次數 103
http://wargamehk.com/cgf/attachment.php?aid=136675

圖片附件: $(KGrHqIOKiwE12VoPCZHBNllR(7ISg~~_3.jpg (17-6-2011 20:27, 134.9 KB) / 該附件被下載次數 109
http://wargamehk.com/cgf/attachment.php?aid=136676

圖片附件: $(KGrHqEOKpQE1qV,jD8QBNllGihs1w~~_3.jpg (17-6-2011 20:27, 103.43 KB) / 該附件被下載次數 91
http://wargamehk.com/cgf/attachment.php?aid=136677

作者: yiuyiusiu 時間: 17-6-2011 20:41

小心唔同時期砌唔埋

作者: MANKF 時間: 17-6-2011 23:05 標題: 回覆 11# 的帖子

呵呵...如果啲鷹嘜牌係真嘅話，我仍相信德國佬嘅standard，尤其老一輩嘅德國佬

作者: Natrium 時間: 18-6-2011 11:52

引用:

原帖由 yiuyiusiu 於 17-6-2011 20:41 發表
小心唔同時期砌唔埋

引用:

原帖由 MANKF 於 17-6-2011 23:05 發表
呵呵...如果啲鷹嘜牌係真嘅話，我仍相信德國佬嘅standard，尤其老一輩嘅德國佬

German Parts in different period should be able to assembly
However matching parts always worth more in terms of value and "self feeling"

作者: Natrium 時間: 18-6-2011 12:08

引用:

原帖由 MANKF 於 17-6-2011 19:47 發表
I think this wood stock was long time not under correct storage and the rear part may even long time under the sun. However, the front part can still find some laminated. However, the whole wood sto ...

The first stock is not laminated stock.
I guess I can find some information if you can show some more stampings

The second stock is a nice Kriegsmarine Kar98k walnut stock!!should be made by Steyr

Match it with Tanaka or CAW 98k which is Bnz coded

CMC 98k are real nice but it's byf coded, which means Mauser made.

BTW, I wounder if trigger guard/ floor plate and bolt is ok or not in HK

作者: MANKF 時間: 18-6-2011 13:03 標題: 回覆 14# 的帖子

Thanks Natrium C-Hing's info. The first stock should be an earlier period produced wood stock - may be from 1934 - 37, from the wood stock mark no. and the wood itself, it seems to be a former Polish Wz29 rifle wood stock and later on converted by Steyr.

The 2nd stock is really a nice one - Kriegamarine Kar98K walnut stock by Steyr-Daimler-Puch in 1943. That's why I ordered this stock and put the first stock aside first.

I also got some information that CMC 98K is the best to fit in real wood stock. However, one point on CMC 98K's receiver code is not according the original, except the point byf coded, it also marked "1943", which original byf coded only "43" was stamped. The marking on CAW 98K is more closed to the original. However, it out of stock!

So I'm still looking in the market for a nice receiver to match with the Kar98K stock.

圖片附件: 98k21.jpg (18-6-2011 13:03, 67.44 KB) / 該附件被下載次數 122
http://wargamehk.com/cgf/attachment.php?aid=136729

圖片附件: 98k9.jpg (18-6-2011 13:03, 108.83 KB) / 該附件被下載次數 98
http://wargamehk.com/cgf/attachment.php?aid=136730

圖片附件: cmc_mauser_kar98k_modelgun_store2_0709_732.jpg (18-6-2011 13:03, 26.73 KB) / 該附件被下載次數 81
http://wargamehk.com/cgf/attachment.php?aid=136731

作者: Natrium 時間: 18-6-2011 16:02

引用:

原帖由 MANKF 於 18-6-2011 13:03 發表
Thanks Natrium C-Hing's info. The first stock should be an earlier period produced wood stock - may be from 1934 - 37, from the wood stock mark no. and the wood itself, it seems to be a former Polish ...

From what I heard CAW was using the mold of CMC, and CAW was closely related to Tanaka, thus modding them into real stock should be not a big problem

It would be strange with a Wz29 without finger Grooves

If you are able to find a Real Steel receiver, just keep it and do not mod it into a model gun receiver

作者: Andy 時間: 18-6-2011 20:43

CMC 個MARKING可以拎部磨機磨左佢
不過玩得發燒D, 係合法的大前提下
可以拎CMC個RECEIVER 去搵D公司
用鋁/鋼照做一

作者: MANKF 時間: 18-6-2011 21:52 標題: 回覆 16# 的帖子

Completely agree with you Natrium C-Hing! From my understanding. CMC firstly made these mouldings, after CMC closed down, these mouldings are in the hand of CAW and continue the production, so the mouldings are the same.
Concerning the 1st woodstock, I also want to know more, I will put more photos with markings on this stock. Hope you can give me more valuable comments.
By the way, better play safe and legally, with all these front band, rings ...and wood stock, I'm more than happy already

作者: MANKF 時間: 18-6-2011 22:13 標題: 回覆 17# 的帖子

Andy C-Hing, 我都係咁諗...買個玩具CMC or CAW receiver & bolt番离，照copy個鋼嘅換上去，當然車埋條barrel換晒啲front sight同rear sight. 但如果咁做....有冇人買番我copy完果支玩具先

因為成本都幾高，同幾浪費。所以仍在鬪爭中

作者: Andy 時間: 19-6-2011 20:24

引用:

原帖由 MANKF 於 18-6-2011 22:13 發表
Andy C-Hing, 我都係咁諗...買個玩具CMC or CAW receiver & bolt番离，照copy個鋼嘅換上去，當然車埋條barrel換晒啲front sight同rear sight. 但如果咁做....有冇人買番我copy完果支玩具先因為成本 ...

浪費係絕對唔會
你有埋set玩具係度
仲要keep齊整ga單
可以做一個證明
唔係到時檢控問...
how to prove 你呢個receiver 同bolt係假,只係一個玩具的仿製品?
要證明起上黎,咪煩d

歡迎光臨 CGF (http://wargamehk.com/cgf/)