CGF - Powered by Discuz! Board

標題: 波箱一問 [打印本頁]

作者: stevenyu2000 時間: 11-7-2007 11:17 標題: 波箱一問

請問 Xyxtema Complete Set 波箱好嗎 ? 還是其他牌子Custom好呢?

作者: LifeAfterDeath 時間: 12-7-2007 01:56

for newbie Xystema mechbox set is great to start with... but for ppl knew what is like inside the mechbox then I will suguess go with custom set up...

作者: 14692 時間: 12-7-2007 04:45 標題: 回覆 #1 stevenyu2000 的帖子

都ok好用, 不過如果師兄識自己set波箱梗係自己set比較平

作者: fuppc 時間: 12-7-2007 08:39

引用:

原帖由 14692 於 12-7-2007 04:45 發表
都ok好用, 不過如果師兄識自己set波箱梗係自己set比較平

師兄咁有心得幾時係氣槍維修站，出D教學比大家呀？？

作者: RC00078 時間: 12-7-2007 08:42

引用:

原帖由 14692 於 12-7-2007 04:45 發表
都ok好用, 不過如果師兄識自己set波箱梗係自己set比較平

但係set 連埋個麼打.......唔會買到假野........
除非佢係連個set 都係.......

作者: LifeAfterDeath 時間: 12-7-2007 09:38

引用:

原帖由華田於 7/12/07 08:42 發表

但係set 連埋個麼打.......唔會買到假野........
除非佢係連個set 都係.......

well if I recall right... there are only those big airsoft shop in "Gun Street" carry the Xystema Mechbox set with motor... and I never heard there is fake/copy yet...

作者: stevenyu2000 時間: 12-7-2007 13:19

引用:

原帖由 LifeAfterDeath 於 12-7-2007 09:38 發表

well if I recall right... there are only those big airsoft shop in "Gun Street" carry the Xystema Mechbox set with motor... and I never heard there is fake/copy yet...

Right, that the one I see in Gun Street $16xx whole gear box set with motor, the shopkeeper say that was M100 power with high ROF. Thats what I want. If custom config, any suggestions ?

作者: LifeAfterDeath 時間: 13-7-2007 02:02

引用:

原帖由 stevenyu2000 於 7/12/07 13:19 發表

Right, that the one I see in Gun Street $16xx whole gear box set with motor, the shopkeeper say that was M100 power with high ROF. Thats what I want. If custom config, any suggestions ?

something like this:
Xystema 7mm bearing mechbox $420
1st gear set $500
1st Piston $190
1st Piston Head $110
1st Aero Cylinder Head $150
Xystema Spring Guide with Bearing $100
Xystema M100 Spring $60
Xystema Turbo Motor $430

this is about it...

作者: 14692 時間: 13-7-2007 04:43 標題: 回覆 #5 華田的帖子

唔會化

作者: 14692 時間: 13-7-2007 04:48 標題: 回覆 #7 stevenyu2000 的帖子

'皇帝手'8mm波箱報殼($390)+'第一'牌怏齒($400)+AC啤呤天梯set($130)+M100彈弓($60-80), 摩打/其他料用番馬記, 已經可以好好玩

作者: stevenyu2000 時間: 13-7-2007 09:48

講少一樣，我枝槍係AK，3代波箱

綜合各方意見
Gear Box : Marui 改 8mm bearing 定 King Arms 7mm Gear Box With Bearing 好 ?
Cylinder Set : Guarder Cylinder Set 連天梯定改用Deep Fire 天梯好 ?
Gear Set : Systema 平齒定 Prometheus 好 ?
Spring : Systema 1J Spring 定 PDI / Prometheus ?

Motor 用回Marui EG700
一定要耐用為原則

謝謝幫忙

作者: stevenyu2000 時間: 13-7-2007 09:50

I plan to use 8.4V battery

作者: Hkpolice-Psu 時間: 13-7-2007 09:52

引用:

原帖由 stevenyu2000 於 13-7-2007 09:48 發表
一定要耐用為原則

原裝馬記IS THE BEST

作者: LifeAfterDeath 時間: 13-7-2007 09:52

引用:

原帖由 stevenyu2000 於 7/13/07 09:48 發表
講少一樣，我枝槍係AK，3代波箱

綜合各方意見
Gear Box : Marui 改 8mm bearing 定 King Arms 7mm Gear Box With Bearing 好 ?
Cylinder Set : Guarder Cylinder Set 連天梯定改用Deep Fire 天梯好 ?
G ...

most of them are almost the same... since you are not after ROF... Xystema gear is do good already (just not as hard as 1st)
Mechbox is really up to u... which one is cheaper then you can go for that...
Cylinder set (well since you want to play with around 1J... no need to change... maybe the Piston Head and Spring Guide with Bearing is optional for you...

hope this can help u out...

作者: stevenyu2000 時間: 13-7-2007 09:58

引用:

原帖由 LifeAfterDeath 於 13-7-2007 09:52 發表

most of them are almost the same... since you are not after ROF... Xystema gear is do good already (just not as hard as 1st)
Mechbox is really up to u... which one is cheaper then you can go ...

Since my cylinder is come from AK Beta, but now put with AK74 with 455mm 6.04 inner

作者: LifeAfterDeath 時間: 13-7-2007 10:01

引用:

原帖由 stevenyu2000 於 7/13/07 09:58 發表

Since my cylinder is come from AK Beta, but now put with AK74 with 455mm 6.04 inner

oic...

作者: 14692 時間: 14-7-2007 04:58 標題: 回覆 #11 stevenyu2000 的帖子

老原+改鋼杯士最耐用

作者: stevenyu2000 時間: 14-7-2007 09:27

已經Confirm左Setting la,交給槍店改
1J power

Gear Box : Marui modify to 8mm box with bearing
Gear Set : Prometheus High Speed Gear Set
Spring : PDI 120% spring
Spring Guide : Guarder Spring Guide

Motor : Marui EG700
Inner : AK 455 6.04 inner
Hop-up: Marui Original Hop up

Cylinder + Cylinder Head + Piston + Piston Head 原本打算用 Guarder Cylinder Enhancement Set for Marui AK
不過無貨，師兄有冇好介紹呀？

作者: LifeAfterDeath 時間: 14-7-2007 09:52

引用:

原帖由 stevenyu2000 於 7/14/07 09:27 發表
已經Confirm左Setting la,交給槍店改
1J power

Gear Box : Marui modify to 8mm box with bearing
Gear Set : Prometheus High Speed Gear Set
Spring : PDI 120% spring
Spring Guide : Guarder Sprin ...

1st... is the best...

作者: stevenyu2000 時間: 14-7-2007 10:08

引用:

原帖由 LifeAfterDeath 於 14-7-2007 09:52 發表

1st... is the best...

you means all use First ( Prometheus ) ?

作者: LifeAfterDeath 時間: 14-7-2007 10:18

引用:

原帖由 stevenyu2000 於 7/14/07 10:08 發表

you means all use First ( Prometheus ) ?

indeed...

作者: 14692 時間: 15-7-2007 07:23 標題: 回覆 #18 stevenyu2000 的帖子

天梯可以試吓AC出品既單向啤呤天梯SET, 百零蚊, 抵玩

歡迎光臨 CGF (http://wargamehk.com/cgf/)