發新話題
打印

[WE] WE GBB M4專區

DON'T use Dyn-Tac SCAR flash hinder andScar silencer together on original barrel......
http://i0.kym-cdn.com/photos/images/original/000/363/834/d00.gif

TOP

回復 16# 的帖子

Why~?
Becoz the barrel too frail~?
F1 , A1 , 300V , 400D , 3 , 1Ds2  , 1D4 / NEX-5N , A7 / X2
17-40L , 28-90II , 18-55II USM , 17-55IS USM , SSWIS /  E18-55 , FE24-70za , FE16-35za
24.4L II , 50.2L , 50.4 , 100/2 , 456L / FD55.2 / FL50.4 / VM40.4 / G35 , G45 / E16 , E30 , E50 , FE55za
580EX II , 430EX II / Metz52

TOP

引用:
原帖由 -l- 於 8-12-2008 09:50 PM 發表

I swapped the barrel in a stupid way already
BEN哥真快手..我等埋d件先換

TOP

This is my stupid way to swap the inner barrel, probably not the best way to do it FOLLOW IT ON YOUR OWN RISK.

remove front sight/gas block, delta ring


there is 2 pin you need to remove,a big one and a small one; Small pin locks the inner barrel and the big one lock the black round thing (whatever you want to call it). DON'T pull the inner barrel out when you removed the small pin, because the small ball bearing will drop inside



Be careful when removing the grey ring, because a small ball bearing is under it and you don't want to loose the ball bearing!
Always remember which side of the grey ring face forward!


Add some oil/lub on the inner sider in the black ring. And you should be able turn the ring using a screw driver through the shell eject.

A little FAQs (will be update from time to time):

Q: The small pin that locks the inner barrel is very hard to put back in, any tips?
A: Try to push the inner barrel towards the receivers and put the pin in at the same time, this may help.

Q: Is there a way to take the Hop-Up unit out the upper receiver?
A: Remove the bigger pin and the "black round thing". Open up the receivers and you can use the charging handle pull the whole unit out from the back.

[ 本帖最後由 -l- 於 9-12-2008 09:56 編輯 ]
本帖最近評分記錄
  • gtoray 威望 +15 原創內容 9-12-2008 01:38
  • gtoray 金錢 +15 原創內容 9-12-2008 01:38
http://i0.kym-cdn.com/photos/images/original/000/363/834/d00.gif

TOP

引用:
原帖由 westdog 於 8-12-2008 23:27 發表
Why~?
Becoz the barrel too frail~?
No, because the threat on the barrel is clockwise. Meaning that the direction to unscrew the flash hider and sound suppressor is also anti-clockwise, and since dyn-tac's flash hinder do not have a 機米 to tighten it on the barrel, you will unscrew the flash hider instead of the silencer...
http://i0.kym-cdn.com/photos/images/original/000/363/834/d00.gif

TOP

請問槍管是否特製? , 可否使用電槍槍管?

TOP

引用:
原帖由 N_G 於 9-12-2008 03:14 發表
請問槍管是否特製? , 可否使用電槍槍管?
The answer is NO, both inner and outer barrel is special, neither of them can be replace by AEG parts

[ 本帖最後由 -l- 於 9-12-2008 10:04 編輯 ]
http://i0.kym-cdn.com/photos/images/original/000/363/834/d00.gif

TOP

引用:
原帖由 -l- 於 9-12-2008 09:40 發表

both inner and outer barrel is special, neither of them can be replace by AEG parts
搭單問下, 咁gp d aeg骨係咪話可以直落we唔洗執? thanks
係既話等佢出埋長管長托就郁手了...唔等佢出其他m系啦, 自己砌好過...

TOP

引用:
原帖由 Pvt.King 於 9-12-2008 09:45 發表

搭單問下, 咁gp d aeg骨係咪話可以直落we唔洗執? thanks
係既話等佢出埋長管長托就郁手了...唔等佢出其他m系啦, 自己砌好過...
So far, I haven't heard anyone use a GP Rail sys on it yet, so I don't know.
Why don't you tell us what you want to build?
And may be we can help
http://i0.kym-cdn.com/photos/images/original/000/363/834/d00.gif

TOP

Thanks to Ben Ching s' brief installation instruction on barrel changing..

BTW.......anybody know abt MODing Pmag or Magpul ranger please?

TOP

引用:
原帖由 -l- 於 9-12-2008 10:08 發表


So far, I haven't heard anyone use a GP Rail sys on it yet, so I don't know.
Why don't you tell us what you want to build?
And may be we can help
我想砌支Gas m16a4, 但已經有支g&p既係度, 想睇下條骨用唔用得番, 買少樣野啫
Thanks anyway.

TOP

引用:
原帖由 Pvt.King 於 9-12-2008 10:39 發表

我想砌支Gas m16a4, 但已經有支g&p既係度, 想睇下條骨用唔用得番, 買少樣野啫
Thanks anyway.
I can use the GP M500 flashlight handguard and MRE on my WE M4

TOP

引用:
原帖由 Pvt.King 於 9-12-2008 09:45 發表

搭單問下, 咁gp d aeg骨係咪話可以直落we唔洗執? thanks
係既話等佢出埋長管長托就郁手了...唔等佢出其他m系啦, 自己砌好過...
小弟將 G&P 嘅魚骨裝到落支 WE 度,唔使汁

[ 本帖最後由 peter9999 於 9-12-2008 15:16 編輯 ]

附件

P1020965.JPG (71.71 KB)

9-12-2008 11:26

P1020965.JPG

P1020966.JPG (69.53 KB)

9-12-2008 15:16

P1020966.JPG

TOP

引用:
原帖由 peter9999 於 9-12-2008 11:26 發表

小弟將 G&P 嘅魚骨裝到落支 WE 度,唔使汁  
好! 等一有人出m16管即刻出手!
Thanks so much

TOP

可能會出呢。

TOP

發新話題