打印

Need you input pls.........

siupo

Rank: 8 資深士官長

帖子: 115
積分: 8719
Like: 0
在線時間: 1275 小時
註冊時間: 1-3-2008

1^# 大中小發表於 23-2-2010 23:34 只看該作者

Need you input pls.........

I finally got my SCK Max before the CNY and I have to say what a wonderful gun it is.... After playing with it for a while, I now have some questions that need you experts to help me out:

- can someone teach me what is the most effective way to load BBs to systema magazines? I saw someone from youtube who uses an metal adaptor along with a regular BB loader to get BBs in.  Is there any shop or person that I can get this adaptor from?  using the long tube and red plastic just isn't a practical on the field.

- will mil/spec CTR be directly installed to the buffer tube of PTWs?

- can PTS UBR be installed to the lower receive of PTW?  I know there will be modification work involved but I might not want to take the risk if mil/spec UBR is the only way but case getting one to HK isn't exactly cheap.

- can anyone let me know where can I get the Pin Punch for putting in or getting in the pins?  I used some generic tools but I figure getting a set of those pin punch would be the best way to deal with the gun in the future.

Your input would be greatly appreciated!!!

TOP

red_ant_tony

Rank: 8 資深士官長

帖子: 135
積分: 8457
Like: 0
在線時間: 1132 小時
註冊時間: 31-8-2008

2^# 大中小發表於 23-2-2010 23:55 只看該作者

1) I found that using the regular BB loader (without adapter) is probably the fastest way. With some training it can be done. Personally I would grab the mag using my left hand and position my left index finger horizontally just in front of the lip to prevent the nozzel of the loader from slipping in front. Then load the BBs in with the loader vertically.
2) Should be OK. (someone correct me if I'm wrong)
3) Han't tried it before. Should be OK.
4) I have been trying to get a set of tools myself. But it's not easy. I've seen QxF having a complete set for sale - real gunsmith tools. You can get one or two sizes from Ap Liu Street but never the complete range that you need. My cheaper solution was to get a set of $10 screw drivers set and cut the ends with a metallic cutter, pollish the rough ends a bit and ended up with a nice functional range of puches.

Hope that helps

TOP

jpg

Rank: 17 少尉

帖子: 1916
積分: 40469
Like: 0
在線時間: 1138 小時
註冊時間: 8-9-2008

榮譽會員勛章高級榮譽會員勛章

3^# 大中小發表於 24-2-2010 03:16 只看該作者

回覆 1# 的帖子

2) Mil spec CTR may fit or may not fit. But PTW stock tube is between mil spec and commerial size. Commerical guarantee will work, but might be a little bit wobble. So I think the best way is use mil-spec CTR and sand down the inside a little bit in order to get a tight fit on your buffer tube.
3) UBR PTS aeg version will not fit. Gbb version, may be.

TOP

sailun412 掃地蓮姐四級准尉哈! 原來你至...叻 ... 帖子 1453 積分 30001 Like 0 來自 The Fight Club Custom 在線時間 924 小時註冊時間 3-10-2008 個人空間發短消息加為好友當前離線	4^# 大中小發表於 26-2-2010 01:05 只看該作者 - No CTR can directly fit on the PTWs original buffer tube without mod except the comm'l spec. I'm a Manufacturer , NOT a Dealer...... I buy more than I sell. I'm merely selling my collections or extra items. I had to buy to get what I want.
UID 6906 精華 0 威望 3950 金錢 2925 犯規 0 閱讀權限 60 最後登錄 24-4-2015 查看詳細資料	TOP

jpg 少尉帖子 1916 積分 40469 Like 0 在線時間 1138 小時註冊時間 8-9-2008 個人空間發短消息加為好友當前離線	5^# 大中小發表於 26-2-2010 03:09 只看該作者回覆 4# 的帖子 That's what I think, but I am so surprise my ACS Mil spec can fit on directly, even though it's a little bit tight. On the other hand, my CTR Mil spec can't fit on directly. QC problem?? .
UID 6736 精華 0 威望 5719 金錢 4176 犯規 0 閱讀權限 80 最後登錄 9-12-2023 查看詳細資料	TOP

小安哥資深士官長帖子 212 積分 8363 Like 0 來自 TKO 在線時間 994 小時註冊時間 4-3-2008 個人空間發短消息加為好友當前離線	6^# 大中小發表於 26-2-2010 04:15 只看該作者引用: 原帖由 jpg 於 26-2-2010 03:09 發表 That's what I think, but I am so surprise my ACS Mil spec can fit on directly, even though it's a little bit tight. On the other hand, my CTR Mil spec can't fit on directly. QC problem?? . Is that ACS PTS version, if yes, then i may go for it thanks.
UID 5186 精華 0 威望 427 金錢 401 犯規 0 閱讀權限 40 最後登錄 4-3-2018 查看詳細資料	TOP

jpg 少尉帖子 1916 積分 40469 Like 0 在線時間 1138 小時註冊時間 8-9-2008 個人空間發短消息加為好友當前離線	7^# 大中小發表於 26-2-2010 16:41 只看該作者回覆 6# 的帖子 No, RS ACS mil-spec version. To be honest, I will still go with mil-spec no matter what, since commerical is too loose for PTW buffer tube. It won't give you a tight fit, and the stock will wobble.
UID 6736 精華 0 威望 5719 金錢 4176 犯規 0 閱讀權限 80 最後登錄 9-12-2023 查看詳細資料	TOP

小安哥資深士官長帖子 212 積分 8363 Like 0 來自 TKO 在線時間 994 小時註冊時間 4-3-2008 個人空間發短消息加為好友當前離線	8^# 大中小發表於 27-2-2010 00:11 只看該作者引用: 原帖由 jpg 於 26-2-2010 16:41 發表 No, RS ACS mil-spec version. To be honest, I will still go with mil-spec no matter what, since commerical is too loose for PTW buffer tube. It won't give you a tight fit, and the stock will wobble. thanks
UID 5186 精華 0 威望 427 金錢 401 犯規 0 閱讀權限 40 最後登錄 4-3-2018 查看詳細資料	TOP

siupo 資深士官長帖子 115 積分 8719 Like 0 在線時間 1275 小時註冊時間 1-3-2008 個人空間發短消息加為好友當前離線	9^# 大中小發表於 27-2-2010 22:39 只看該作者 thanks for all the useful feedbacks!
UID 5160 精華 0 威望 400 金錢 390 犯規 0 閱讀權限 40 最後登錄 5-8-2017 查看詳細資料	TOP

小安哥資深士官長帖子 212 積分 8363 Like 0 來自 TKO 在線時間 994 小時註冊時間 4-3-2008 個人空間發短消息加為好友當前離線	10^# 大中小發表於 28-2-2010 19:11 只看該作者 Oh sorry, i want to ask which brand's tangodown grip is better? thnks.
UID 5186 精華 0 威望 427 金錢 401 犯規 0 閱讀權限 40 最後登錄 4-3-2018 查看詳細資料	TOP

sailun412 掃地蓮姐四級准尉哈! 原來你至...叻 ... 帖子 1453 積分 30001 Like 0 來自 The Fight Club Custom 在線時間 924 小時註冊時間 3-10-2008 個人空間發短消息加為好友當前離線	11^# 大中小發表於 28-2-2010 20:10 只看該作者 - Tango down mod is the best for sure! - G&x airsoft version is the 2nd choice for me... I'm a Manufacturer , NOT a Dealer...... I buy more than I sell. I'm merely selling my collections or extra items. I had to buy to get what I want.
UID 6906 精華 0 威望 3950 金錢 2925 犯規 0 閱讀權限 60 最後登錄 24-4-2015 查看詳細資料	TOP

Need you input pls.........

Need you input pls.........

回覆 1# 的帖子

回覆 4# 的帖子

引用:

回覆 6# 的帖子

引用: