發新話題
打印

尾通問題

尾通問題

請問師兄們有咩野牌子尾通係可以直上PTW嫁?
(真品以外)
因為細佬想轉用Magpul PTS CTR stock,但由於原茌尾通上唔到Magpul PTS CTR stock,所以想轉尾通!

[ 本帖最後由 magic_co2 於 15-2-2012 13:52 編輯 ]

TOP

gbb既尾通得,不過你要自己開返個位走線

TOP

引用:
原帖由 優之涼粉 於 15-2-2012 14:00 發表
gbb既尾通得,不過你要自己開返個位走線
1.請問係唔係所有gbb尾通都可以直上PTW同直上Magpul PTS CTR stock?

2.價錢大概幾多錢?

3.gbb尾通有冇六段果種?

4.係唔係開返個同原茌一羊Ga洞走線便ok?

TOP

回覆 1# 的帖子

gbb 尾通,不過你要張尾頂攞走同要鑼坑走電線,你有小工具就一定做到
不過先聲明,GBB 尾通比原裝尾通內徑細1MM~2MM左右
本人係用GX尾通的,不過5KX都得

TOP

喂! 買條珍品都係伍佰以內! 再比多兩舊水改, 貴小小但一勞永日.

TOP

引用:
原帖由 magic_co2 於 15-2-2012 14:12 發表

1.請問係唔係所有gbb尾通都可以直上PTW同直上Magpul PTS CTR stock?

2.價錢大概幾多錢?

3.gbb尾通有冇六段果種?

4.係唔係開返個同原茌一羊Ga洞走線便ok?
1.大多數都係,最好就用GX.KX.5KX.CX,大多數都直上Magpul PTS
2.因為以上品牌通都算最平
3.冇記錯係有的

TOP

請問價錢大概幾多百至幾多百??

[ 本帖最後由 magic_co2 於 15-2-2012 14:33 編輯 ]

TOP

同時請問GX.KX.5KX.CX係咩野牌子?

[ 本帖最後由 magic_co2 於 15-2-2012 14:36 編輯 ]

TOP

I bought a commercial specs buffer tube with full positions marking for less than $150, not sure if they still have it in the market

TOP

引用:
原帖由 Devon 於 15-2-2012 18:24 發表
I bought a commercial specs buffer tube with full positions marking for less than $150, not sure if they still have it in the market
commercial specs....咁你買STOCK時咪一定要揀返commercial specs先得,例如magpul咁,佢pts係出mil-spec,如果你要用magpul既stock,咪唔可以用pts版一定要買real stuff

TOP

引用:
原帖由 優之涼粉 於 15-2-2012 20:06 發表

commercial specs....咁你買STOCK時咪一定要揀返commercial specs先得,例如magpul咁,佢pts係出mil-spec,如果你要用magpul既stock,咪唔可以用pts版一定要買real stuff
Yes, because I remember the specs of the systema buffer tube was wrong back in 2010...neither mil or commercial specs which doesnt fit the real CTR..so I had to buy a replica commercial specs to fit the real CTR

TOP

發新話題