發新話題
打印

[Marui] PDI 01, 05和08問題

就小弟之前周圍上網睇, 內徑愈細愈少空間比空氣走, 大部分氣都用晒去粒彈度所以會大力D (但唔多, 約5-20FPS)
但彈同內管之間少左空氣做緩衝令粒彈係條管入面"亂郁", 所以6.01之類太緊對準確度無乜大幫助
相反闊D既(篇野話08以上先叫闊, 我覺得05都OK)會多少少空氣做緩衝等佢無01管咁郁得咁嚴重, 但FPS會相對無咁高
"Tight bores are generally better for closer ranges."
"Standard bore barrels give you a nice balance between effective range and accuracy."

http://blog.airrattle.com/tight- ... re-barrels-in-aegs/
=================================================================
另外條管愈闊HOP效果愈好(粒彈可以飛遠少少): http://www.ebay.com/gds/How-to-I ... 000178075787/g.html
"Best CQB barrel: PDI 6.01 (Economical choice: Madbull 6.01, PDI Raven, or Angel Custom 6.01)"

"Best Mid-Range barrel: Prometheus 6.03 (Economical choice: Madbull 6.03 or Matrix 6.03)"

"Best Long Range barrel: PDI 6.05 or Orga 6.23 if enough air can be supplied, as the Orga will have the best effect on range. Orga also sells a 6.10 barrel if you cannot supply the air for the full bore 6.23 (Economical choice: None, high performance = high cost)"

01, 05 同08應該係睇你想打咩距離唻決定
=================================================================
以上內容全部照書讀, 有錯請指正

係部分論壇不時見到有人討論相關問題時經常有人話愈緊愈好然後就開始爭論, 大概新手師兄都係因為咁所以話內管闊窄理論大賽正式開始

[ 本帖最後由 ner 於 27-11-2017 04:17 編輯 ]

TOP

其他論壇有人做左測試,4樓係結果, 13樓係總結
留意佢每條管都唔同牌子,只供參考
http://www.airsoftsniperforum.co ... /topics/4076?page=1

都係講緊01打近表現好過05或08
相反打遠會見到08優勢

(網上內容,非出自小弟手筆唔保證100%準確,有錯請指教

[ 本帖最後由 ner 於 27-11-2017 15:56 編輯 ]

TOP

發新話題