kai_matt

IMM, u want an Open gun, right?
I think around $10,000 can already build a very fine outlook

kai_matt

I build this Standard gun for $5xxx





nearly fully modified

CP IMM slide + middle frame + outer barrel...set, cost a bit under $3,000
If u r gonna use a real C-more and aluminium grip; that will cost u over $10,000
but if u r gonna use SD grip or AABB grip with "See-more"; that will only cost u $8,000-10,000 at most for a fully modified one (including鋼四寶)

[ 本帖最後由 kai_matt 於 26-3-2013 13:32 編輯 ]

kai_matt

引用:

原帖由 COOL 於 26-3-2013 13:21 發表
如果要豪砌當然可以去到幾萬啦~

如果係imm剩個架都2千~個身又2千...個膽又成千~

即係如果咩都未改剩個樣己經5000啦~

買個炭纖鏡橋,真品鏡呢度要貴既又5000啦~

之後改下d餡......買下甲...(甲先貴...)

...

由一支'馬老爺'玩具開始, 唔計彈夾在內

IMM full set is around $3,000 only

kai_matt

cocking handle 1xxx
that will be super perfect if you use Prime aluminium grip

I got only three Standard race gun only....they are reli too expensive; hv to save money for a long time to get one

kai_matt

SD Slide and middle frame
I hv now changed the hammer into the silver SV hammer

kai_matt

These four parts I prefer to buy in QXF
all four steel parts for 6XX

kai_matt

其實你可以搵搵我個post,
六吋dusy cover得sd
襯hobby八折快啲買啦
我嗰時條架同中身都三千一二

kai_matt

要好順就要執少少
你知架啦，你sd, cp etc. 全部有少少公差

kai_matt

RCman師兄就砌過nova六吋STI
SVI就得SD

kai_matt

呢樣我無特別留意..../3\

kai_matt

個手感差好遠wor T.T

kai_matt

成二千蚊個grip
我呢啲學生哥真係俾唔起
不過.......
真係好靚

kai_matt

鋼嘅我就俾唔起lu T.T

kai_matt

a lot wor.....
like IMM or Infinity Hero; slide plus middle frame are around $3000
but a steel middle frame alone costs already $3000.........

kai_matt

better change the internal firing pin
will be much smoother