發新話題
打印

DIY之二戰蘇聯NR-40格鬥刀

DIY之二戰蘇聯NR-40格鬥刀

很久沒買東西,耐不住買了二把假刀(未開鋒).今次主題是其中一把:二戰蘇聯NR-40格鬥刀

歷史太沉悶就不說了.蘇聯NR-40格鬥刀大概是北歐芬蘭刀的變種.由原來政府禁止的混混小刀發展而來.邊看圖邊介紹.

一如其他二戰蘇聯東西,都有制式規格但執行不嚴.此刀主要問題是真品皮帶材料工藝多樣.今次只重新DIY一些假刀的致命傷.日積月聚的資料搜集減省了前期工作.

剛買回來:




刀鞘頭造錯成一個平面,磨尖再blue.刀頸少了一圈金屬環,先把刀頸削一道坑:


用廢棄鋁板加膠水,錘子敲打"鑲"進去刀頸坑中,再用銼子銼掉鋁圈接合的縫.


按資料衝出年份和廠印.廠印俄文字母用字母衝加一些技術衝出,再用勾刀手彫其餘部份.


玩二戰蘇聯軍品,一定要學一些皮革修補與補養技術.今次重做整條皮掛,因為假刀的皮太差,不對色,扣子錯誤.
計好實物數据,用家中的後備皮料開料.後備皮料是深棕的,我用馬克筆塗黑後用布一擦,顏色就自然了.
因為皮帶尾要收進刀鞘,皮太厚刀太鈍,用銼刀銼薄,然後黏合,再插進去.


打皮釘,開扣眼就不說了


賞圖時間:
德軍靴刀/格鬥刀(假)





是次收獲:蘇聯和德國的

一真一假

DIY完了的NR-40








TT33和刀



Final:


謝謝觀看

[ 本帖最後由 sovietarmy2012 於 1-11-2013 00:06 編輯 ]

TOP

原文:
http://117orb.at.ua/publ/2-1-0-48
我睇吾Q明...
http://translate.google.com.hk/t ... at.ua/publ/2-1-0-48

The blade bevel butt ("pike", a clip-point), hills occupy about half the width of the blade, before severe heel guard for transferring the index finger on the blade. The most characteristic feature of the Scout knife is an S-shaped cross guard having unconventional bend: the emphasis on the part of the blade guard is not bent in the direction of the handle, but on the contrary to the blade. This unusual "inverted" guard due solely to combat knife thrust: Enough considered the main line with the direction of the blade flipped up (to knock the bottom-up in the stomach and hypochondria) or reverse (for strikes from the top down to the neck). In both grabbing the knife in the hand "upside down" relative to the usual traditional position of the knife, so the guard has received the appropriate bend. Handle and sheath were made ​​of wood and painted black (to avoid unmasking during night operations), but the blade blueing and coatings are not subjected. Recommended to carry a knife on your belt on the left side at an angle of 30 °, a handle to the right.

TOP

我問兩位高人,一致認為要扭向自己,我扭了.之後睇90%原品係扭向敵人,我又扭過.

再扭只怕變左魚腸劍

TOP


唯有學人地劍譜咁...先禮後兵咁插人la

TOP

我對刀一無所知,連刀刃向邊點插都吾曉

我似軍械士多D

TOP

引用:
原帖由 tango1997 於 1-11-2013 01:38 發表
裝錯野!。。。不過你有圖多的是。。。當我無講過
原來係本身設計呀,我屈左兩次了

TOP

引用:
原帖由 tango1997 於 6-11-2013 21:54 發表
前者。。。。以挑、剌、扭為主
後者。。。。以拖、插、割為主
我估:
前者刀向前

後者刀埋身

TOP

無情兄口中的胡人係一位刀匠嚟ga wor...頭披胡巾,有西洋墨鏡者

http://mickstridercustomknives.com/about-mick-strider/

TOP

揾日想試下飛刀



現代版:


[ 本帖最後由 sovietarmy2012 於 7-11-2013 08:49 編輯 ]

TOP

發新話題