ayaka

引用:

原帖由 Castlevania 於 9-6-2009 13:35 發表
C兄,呢條幾寸管啊
THX

似16" wor

ayaka

引用:

原帖由 Castlevania 於 9-6-2009 20:36 發表

係唔係連接槍身同槍管位個度的直徑大小啊??
我睇左自己條骨....個位又真係好似好細.......

你個條唔係真骨ma?? 如果你上prime身應該無咩問題
最多都係有gap姐

ayaka

引用:

原帖由 Castlevania 於 9-6-2009 23:24 發表

係啊~我個條係真骨~
真骨上PRIME....都仲係有GAP???

要睇條外管la~

ayaka

引用:

原帖由 jpg 於 10-6-2009 05:19 發表
真骨上prime 應該問題唔大. 1-2mm 既gap 就點都有架啦.就算真槍都會有gap.

e條係咩骨呢?
barrel nut個到又似urx....骨身又似dd

ayaka

引用:

原帖由 red_ant_tony 於 11-6-2009 13:48 發表
It is the combined rim thickness of the outer barrel and barrel extension that caused this to happen. If you have means to file away 2mm of the outer barrel's rim, you've got your gap-less flat top ra ...

ya~ Depands on your barrel
that's why some ching had modified tapers on both barrel nuts and the RAS to reduce that gap

ayaka

引用:

原帖由 red_ant_tony 於 11-6-2009 16:38 發表
Anybody got any idea how I could tune down the power apart from using a shorter barrel or using NPAS?

use 134A

ayaka

引用:

原帖由 red_ant_tony 於 11-6-2009 16:38 發表
Anybody got any idea how I could tune down the power apart from using a shorter barrel or using NPAS?

What power is your gun now and how much you want to tune down?
There seems no such product except NPAS
I think it is posiible to tune the power down by DIY,
but i don't think it is a good way to do

ayaka

引用:

原帖由 red_ant_tony 於 11-6-2009 21:16 發表
Horribly high power. So high that we're forbidden to discuss it here. I aim to tune down to something more 'friendly'......like 1-1.2J
I've heard that by changing / custom making the 'fei biu' you co ...

What is the setting of your Bolt set?
Mine one is built with RA Bolt carrier, NPAS, white nozzle
some minor modification is need if u use white nozzle with NPAS.

ayaka

引用:

原帖由 red_ant_tony 於 11-6-2009 22:00 發表
I'm currently using WOC original white nozzle set + Prime steel bolt carrier + a match O-ring from Reclamation street.

Your setting can use NPAS too.....search some old posts
there are some detail tutorial.....not so hard to modify~

ayaka

引用:

原帖由 red_ant_tony 於 20-6-2009 07:17 發表
Thanks. I would like to ask whether the complete NPAS 'plastic' nozzle set is fragile or not? The 'white' GP nozzle is definitely durable.

many chings had bad experience with that translucent plastic nozzle
i think white nozzle is the best.....i replace my RA metal nozzle with the white nozzle
more elastic & durable

ayaka

引用:

原帖由 Castlevania 於 25-6-2009 22:19 發表
點解PRIME個身同PRIME個掛機座合唔到GA??
唔通我裝錯左??
有C兄教路嗎?
THX

有無試下揼下佢?

ayaka

引用:

原帖由 Castlevania 於 25-6-2009 22:24 發表

??
冇啊....你地本身會唔會緊樣嫁?
THX~

我換gp身出現過咁ge情況...prime身就唔肯定

ayaka

引用:

原帖由 hermanht 於 26-6-2009 11:01 發表


借圖

CNC... 如果有真數注壓ver就好了... 一條一條刀痕...

e個先係cnc的證明丫ma

ayaka

引用:

原帖由 Castlevania 於 26-6-2009 23:57 發表
其實G&P WA M4 Aluminum Buffer ( HHR )同G&P WA M4 Aluminum Buffer ( Hard Recoil )呢兩隻BUFFER邊隻好用??

THX~

無咩大分別呢

ayaka

引用:

原帖由 Castlevania 於 27-6-2009 20:48 發表
咩都冇裝上去,就緊樣試下位,都有GAP

咁已經好好la.....好難無gap的