mozcardking

希望樓主唔介意, 我都想問一問aimpoint 3x既野
想問下各位師兄, 如果裝左aimpoint 3x瞄個陣係唔係都係應該用兩隻眼瞄?
我用緊個copy aimpoint同copy3x, 唔用3x個陣就係雙眼瞄,無問題
裝左3x之後雙眼瞄就會唔準, 單眼瞄又好似ok (我都唔知係唔係, 淨係試過一兩次)
據聞eotech (真品) 由任何角度望入去個點都係向住set好個位, 所以我係度諗會唔會係支copy aimpoint既問題; 改用真鏡會唔會就可以加3x 雙眼瞄? 定係我問題呢?
可能寫得有d唔清楚, 望師兄們原諒
多謝咁多位師兄先!

mozcardking

引用:

原帖由 Kane 於 20-3-2008 00:58 發表

支3x mag 要歸0............

多謝kane兄解答, 我係aimpoint個site度copy左呢段野:
3.3 Operation procedures
The 3XMag does not need to be zeroed. However, the
Aimpoint sight used together with the 3XMag must be
zeroed so that the red dot of the sight creates the correct
point of impact.
Additionally, the 3XMag has two Allen screws which
allow the user to center the red dot of the Aimpoint sight
when viewed through the 3XMag.

唔知kane兄係唔係指個兩個Allen screws  呢?
麻煩晒師兄!

mozcardking

引用:

原帖由 Kane 於 20-3-2008 04:07 發表
yes

明白晒, 唔該晒kane 兄!!