49 1234
發新話題
打印

VFC SR25香港區開箱

引用:
原帖由 loveless 於 20-9-2016 13:09 發表


用跟鏡原裝34mm環, 高度其實足夠clear 支417既後準星, 但前鏡會被魚骨頂到, 所以焗住要加升高橋.

未諗通鏡既高度..我見網上好多MR308/MR762用家都係照搬AR 1/3高度鏡座落槍,但o甘高塊臉唔會枕實尾托, 所以唔係 ...
係香港搵真34都難, 更唔洗諗COPY嘢, 實無乜人出過, 不如睇下呢度, 都好多選擇
http://www.opticsplanet.com/s/34mm-ring

[ 本帖最後由 dogjumpjump 於 20-9-2016 14:28 編輯 ]

TOP

開始研究 M1 - M3 配SR25
找到二手都是M1, 如 Leupold Vari-X 3 Long Range Tactical M1 Rifle Scope 30mm Tube 3.5-10x
想買, 但..有以下考慮

但M1 1/4 MOA 比較適合民用, 警用, 單一目標射擊
軍用的多數用M3, 1 MOA 合多目標, 高壓力下射擊,

那配上M1, 就做不了軍用版, 或不能對應.308? .. 唉.. 又要諗..  要多讀點書..
http://www.opticstalk.com/leupol ... ics_topic15845.html

M1 - 1/4 MOA elevation, 1/4 MOA windage. They can be removed if you take the set screw out. This allows you to "zero" the knobs.

M2 - 1/2 MOA elevation, 1/2 MOA windage, BDC calibrated for .308 168gr (only one knob included but different calibers can be obtained from Leupold.) Knobs can also be removed via the set screw to set back to zero.

M3 - 1 MOA elevation, 1/2 MOA windage, BDC calibrated, includes 3 interchangeable turrets calibrated for .308win 168gr, 300 Win Mag 190gr, and .223 Rem 55gr. Knobs can also be removed via the set screw to set back to zero.

[ 本帖最後由 dogjumpjump 於 23-9-2016 11:39 編輯 ]

TOP

引用:
原帖由 Oowing 於 5-10-2016 10:58 發表
真品腳架佢係用邊款

Thx師兄
應該用HARRIS中長度腳架
http://www.papagoarms.com.tw/Collection/Detail/3353

TOP

見到個帖浮返上來, 不如我update 下支SR25加咗D必嘢珍嘢

好辛苦先搵到支舊版 Leupold MK4 3.5-10X M1 mil-dot, 可借未搵到M3, 頂住先, 模上手, 就知珍嘢係唔同, 十分清 , 價錢都幾合理

另跟返原SET配備, 入咗harries enginnering 9-13inch bipod, VFC果支實在太短, 而copy造工太差, 支SR25咁重, 用兩用就焊位斷



TOP

 49 1234
發新話題