發新話題
打印

國產各廠gbb

引用:
原帖由 hermanht 於 25-5-2009 13:06 發表


加埋ready mag...

支槍load左立即重兩KG

不過有冇人知真鐵mag load左28飛之後有幾重啊?



可能A豬M以為亞鉛真係鉛來...
A Standard NATO STANAG 30 Round Magazine with 30 Round 5.56x45mm NATO weight approximately 1 Pound (0.45359237 KG)

TOP

quote from 51QBH
引用:
今天在香港槍舖試打AGM GBB M4,感覺如下:

全抄WA,但是槍機頭改用類似白尼龍的質料,射擊時沒有金屬踫撞聲音
後座力強大,但是沒有打過WA,所以無法比較,
彈夾沒有一公斤那麼重,主觀感覺比一般手槍彈夾重一倍左右
試打彈夾沒有漏氣,但試打槍無彈後定功能已失靈,
老闆話有罐底力

其實感覺良好,只是擔心材料耐用度及是否真正可與甚他WA補品同數

TOP

btw, in mainland only sale in RMB$720
http://202.134.92.226/gouwu/product.asp?id=1591

TOP

引用:
原帖由 紗夢 於 26-5-2009 20:30 發表
分解,睇落唔錯喎
http://www.youtube.com/watch?v=UU6xMM26cm0
Oh, Handguard, Bolt, Piston got to change.
Also the most the most important, is the parts can replace with WA parts. The "Tennis rackets" (Bolt Lock) i'm concerning.
If any Ching knows, please tell us.

TOP

引用:
原帖由 hsbc 於 26-5-2009 22:47 發表
咁既$$唔駛諗啦,我買左啦,枝野一定好過we!跟本就係wa copy出黎,試槍bolt lock 唔到不過問題唔大,之後用wa匣試即刻lock到,測速器測過.25珠1.83j,25度,topgas,手抽有d鬆,未知可唔可以變短版,無marking,不過聽講搵人做m ...
ching, i got 3 question to ask.
1. What spec is AGM take on Handguard, Buttstock, Recoil Piston, is AEG or real spec?
2. Is the forward assist button functional?
3. How's the Mag performs, and is the leak problem very strong?

Thanks Ching

TOP

引用:
原帖由 hsbc 於 27-5-2009 01:26 發表
1,我只可以講copy wa,真係唔知真唔真數
2,yes
3,我隻匣暫時ok無漏,密謀枝134返黎試下幾大力,

大家研究下者,唔駛客家!
唔該哂師兄
我呢D新手, 禮多人不怪ma
因為見佢Bolt頭同Recoil Piston係白尼龍, 買番黎一定要換, 但唔知可唔可以用WA既, 所以問下

TOP

引用:
原帖由 denniscty 於 27-5-2009 20:31 發表
轉自豐乳者

AGMGBB(转贴C2"563241195 "


http://JPG.POW ...
T骨, 網球拍, Recoil Piston, Bolt都好危下

TOP

引用:
原帖由 vincentihmc 於 28-5-2009 03:18 發表

o thx
但係我睇過個valve 個樣又無咩異常...


btw
我想問下大大有冇地方有show 點樣合番埋支槍...
我手多拆左內管出黎睇之後... 合番埋就疴尿彈...
Is that the hopup problem?

TOP

引用:
原帖由 vincentihmc 於 28-5-2009 02:01 發表
佢係o係個出氣口度漏出黎...
有冇ching 知係咩事?
got u something, hope can help, and of course report to us after thank you

http://www.taf-inc.com/discuz/vi ... &page=2#pid9119
http://www.arms-cool.net/forum/thread-14347-1-1.html

TOP

發新話題