CWHS

引用:

原帖由 豬肥 於 29-5-2010 18:42 發表
其實關唔關電腦個spec.事?

Due to bandwidth issue by connector
Max resolution shown as follow
D-Sub 2048x1536
DVI Single Link 1920 × 1200
DVI Dual Link 2560 × 1600

The solution for your problem, simply just change to DVI connector or just click AUTO ADJUST on your monitor. If the problem didn't solve, that mean your VGA driver wasn't function properly, just go the the manufacturing site(ATI, Nvidia, VIA, SIS, Intel) to update your VGA Driver.

[ 本帖最後由 CWHS 於 29-5-2010 19:01 編輯 ]

CWHS

引用:

原帖由 莊家-犯罪無間 於 29-5-2010 21:05 發表

唔排除係

He already said his onboard VGA is GF7025, absolutely capable to run Full HD+.
As i said just change to DVI will do, otherwise maybe driver issue.

CWHS

引用:

原帖由 莊家-犯罪無間 於 29-5-2010 21:19 發表

電腦的問題好難講,撞左d咩,有時真係估唔到

That was just basically signal and driver, it's rarely to 撞.
This problem is common on D-Sub, as i said just change to DVI.

引用:

原帖由 ++朗++ 於 30-5-2010 04:15 發表
買張display card啦
好可能因為佢頂唔到
即使唔關佢事
比你用到full HD都唔會順得去邊啦
無謂咁虐待部機

That was a common wrong idea for most people, for 2D task it's way more than enough to run, Full HD (1920 x 1080 x 32 / 8), for core certainly no problem, for VRAM it will only require 7.91MB.
And there are no such thing of "都唔會順得去邊啦"and"咁虐待部機"
How about if i tell u a 1999 TNT2 32MB can run smooth on 2048 x 1536, which is the restriction by D-Sub.

[ 本帖最後由 CWHS 於 30-5-2010 15:49 編輯 ]

CWHS

引用:

原帖由 豬肥 於 30-5-2010 22:22 發表
我check話我張motherboard係無dvi port
係咪加張有dvi頭既display card就ok?

So did u try update the driver first? or did u see a HDMI port on MB?

引用:

原帖由 ++朗++ 於 31-5-2010 01:07 發表

佢用on board display card
用到上full hd
一開game我就唔信佢會行得順
我唔係話行唔到
日常咁用當然冇咩問題啦
但係如果佢行D用好多display card資源GA野
on board就好大機會頂唔順
既然加張卡都唔係好貴
...

In this case 7025 won't "running" any kind of 3D game in this 3years(at least) in Full HD.
So it doesn't matter the core will sustain a lot, in additional "用到部機咁盡" even if u using a external card. You will still using your core resource, so there are no such "用到部機咁盡" thing.