gainax

呢個身應該係派仔最高水準之作,7K靚仔CNC潮款仲咁多線切割鋼件抵 ,
我覺得可以玩下新款尾

thumb.jpg (55.78 KB)

7-4-2017 21:10

SAI Style T骨同雙邊選擇掣就一定唔少得

gainax

以前派普通M4身都3千6, 呢個特別潮款起碼4千幾, 買成支抵好多
個托就真係唔知乜名堂我覺得幾襯sai

gainax

引用:

原帖由 2slow 於 10-4-2017 09:51 發表
7K 有Prime身潮槍算ok啦, 不過比我會買毒蛇

唔知近期GP出的SAI 淨receiver是否Prime出的呢

豬皮隻Sai身百幾蚊美金係鑄造WA尺吋所以咁平
大蛇出鍛造就唔止7k了,416同sr16都8k,出潮身潮骨潮煲估計一皮

gainax

引用:

原帖由 Kwind 於 10-4-2017 21:56 發表
呢支本身都鐘意

但本身屋企得VFZ & 馬記系統

又唔想為左個款開多個系統

諗緊就咁買條前節裝落普通M4身算了

個樣差好遠 ,要平可以砌呢隻,

gp-wp198-sai_1_mark.jpg (74.09 KB)

10-4-2017 22:49

169美金,成支平砌我估約3千幾,如唔介意個樣換就骨ok了

gainax

貴版槍身係cnc真數陽極,豬皮件平野是鑄鋁漆面WA數
無論硬度同質感同尺吋都爭好多,一分錢一分貨

gainax

G&P SAI 10.5" Gas Blowback-48 (Short) (Limited Quantity)
-WOC48S
**Licensed by Salient Arms International**
***Had licence from Magpul PTS***
Magazine Capacity: 39
Length: 730mm / 810mm
Weight: 3120g
Built Material: Metal & ABS & PA
134A Gas Muzzle Velocity: 285-295fps (0.9J)(0.25bb)(Room Temperature 20 degress)
Included:
-SAI Metal Body (Aluminum 6063)(CNC Process)
-Short Railed Handguard with SAI QD System For Tool-less Rail Changes
-SAI 10.5" Outer Barrel
-556K Flashider (CW) (Short)
-Magpul Gas Blowback Magazine (Black) (WP159B)
-WA LMT Grip (Black) (WP166B)
-Plastic BUIS Sight (Black)
-6 Position Stock Pipe (WP59)
-Crane Type Buttstock (Black)
-Hammer Set (WP11)
-Steel Stock Ring (WP26)
-M4 Steel Sear (WP33)
-M4 Bearing Hammer Pin Set (WP34)
-Cocking Handle (CNC Process)
-M4 Hammer Lock (WP57)
-Steel Magazine Catch
-Steel Selector
-GBB S Forward Assist (Silver) (WP181)
-M4 Aluminum Buffer (WP81A)
-Complete Bolt Carrier (Negative Pressure)(Gold Chromic Coating)(WP179)

gainax

引用:

原帖由 near104 於 11-4-2017 10:08 發表
雖然成槍係CNC身但係都係WA數隻身短左 PRIME BOLT一樣落唔到.....

隻CNC都係WA數? 睇R@條片係真數樣式連個選掣固定座都係跟返以前派身一樣,唔同WA數多件上面圖銀色舊座裝Buffer Lock

5474879.jpg (64.76 KB)

11-4-2017 10:58

34252352.jpg (54.39 KB)

11-4-2017 10:58

wp98_2.jpg (43.73 KB)

11-4-2017 10:58

唔通個身做真數樣式但特登做短D

gainax

睇個樣就係真數款,但佢要做返短WA長度比真數短5MM(更正返)就睇唔出
要揾件真數身例如井記大蛇VVEVFZ上或下身互裝先知

[ 本帖最後由 gainax 於 11-4-2017 11:15 編輯 ]

gainax

引用:

原帖由 kai_matt 於 11-4-2017 14:15 發表
望過實物就覺得好大分别
質感咪佢平時啲青蛙身咁

豬皮表面處理工藝平既都係焗漆加上鑄造就係平時青蛙身既質感 同cnc陽極個feel完全兩回事,以前我正是為左質感換左派身所以咁清楚
既然都係真數樣,有冇爭個5mm其實都可以接受既,最緊要做得靚仔似樣

gainax

即是cnc個隻是真數豬P是WA數 可能佢唔想直接打擊自己套貴身做返WA掛