發新話題
打印

新版2012ptw疑問

其實MOTOR 都唔算太大問題..
而家好多副廠野..
希望新HOPUP 有突破..

TOP

引用:
原帖由 ayaka 於 8-3-2012 15:32 發表
我個MOTOR依排打打下單發會停, 閃紅燈
清左齒2個窿仔& motor碳粉都係咁
可能個motor夠鐘了?
睇呢真係夠鍾啦....
希望副廠野快D出啦...

TOP

引用:
原帖由 spec.ops. 於 8-3-2012 15:42 發表

都唔係架,點都希望新摩打大力同襟啲
咁又係..
收得咁既價錢...
仲好似話要加價..
點都要做返好少少, 如果唔係點叫人買...

TOP

引用:
原帖由 kidult 於 8-3-2012 23:34 發表
Coming out 冇用….. 要等間做野慢幾拍既代理番個下耐…..
要知道PTW 市場細, 而家YEN 價高, 入左貨都唔知幾時散得到D貨..
比你/我都唔入貨啦, 不如賣多幾件普通aeg 貨唔好..(生意佬mode)
師兄都係睇開d 啦..

TOP

綜合最重要既幾點:

Inner barrel:
The inner barrel (which has the greatest influence on accuracy) has undergone some changes
to the shape at the tip of the barrel
in 2012; this shape was designed to not disturb the
trajectory of the round as the compressed air ejects the BB from the barrel.

Hop-up:
In the 2012 model, we extended this methodology; we added an improvement to the HOP adjuster,
maintaining the accuracy of short range targets while increasing the flying distance for long
range targets.

Motor
The new 7511 type rotor boasts a newly designed Core Piece and Commutator for the 2012
model. Neodymium magnets with improved heat resistant performance have also been
integrated. The bearing size has also increased. With those improvements, an even higher
output and greater durability performance is ensured.

Cylinder:
new Stainless Steel Cylinder Unit

所有2012 款將會跟, MAGPUL REAR MBUS 同 MOE TRIGGER GUARD.

BTW, I found a typo mistake on their prinout...they put rear site instead of rear sight.. that's funny.

歡迎各師兄再加多D資料上去..

[ 本帖最後由 jpg 於 9-3-2012 05:27 編輯 ]

TOP

引用:
原帖由 spec.ops. 於 9-3-2012 09:00 發表

Magpul野睇怕都係PTS黎
完全唔出奇,我寧願要steel carrier handle, 起碼有得用呢上下骨。
最有興趣反而係個hopup adjuster.

[ 本帖最後由 jpg 於 9-3-2012 15:32 編輯 ]

TOP

發新話題