MANKF

近來儲咗好多Kar.98K 嘅parts， 同剛啱番咗個木托，想整番支跟真數嘅model gun！最底限度個玩具receive可以落到個真托！請各C-Hing大大提點指教邊個玩具牌子fit到真數！ Thank you

MANKF

Andy哥你好！真係CMC，我都心裡有數  記得係台灣網啲C-Hing都講過！而我上次支CMC M1 carbine都落到真木托！但唔知其它parts又如何？

MANKF

ndl哥你好！其實我淨係要CMC個receive最多要埋個bolt，因為呢啲嘢係唔應該入嘅！ 另外啲parts都係有marking同nos.嘅好

MANKF

I think this wood stock was long time not under correct storage and the rear part may even long time under the sun.  However, the front part can still find some laminated.  However, the whole wood stock need to rework and laminated once again.   By the way, I have ordered another woodstock for K98K which is a walnut once.  See photos

MANKF

啲鷹遂粒執，都真係幾係嘢

MANKF

呵呵...如果啲鷹嘜牌係真嘅話，我仍相信德國佬嘅standard，尤其老一輩嘅德國佬

MANKF

Thanks Natrium C-Hing's info.  The first stock should be an earlier period produced wood stock - may be from 1934 - 37, from the wood stock mark no. and the wood itself, it seems to be a former Polish Wz29 rifle wood stock and later on converted by Steyr.  

The 2nd stock is really a nice one - Kriegamarine Kar98K walnut stock by Steyr-Daimler-Puch in 1943. That's why I ordered this stock and put the first stock aside first.

I also got some information that CMC 98K is the best to fit in real wood stock.  However, one point on CMC 98K's receiver code is not according the original, except the point byf coded, it also marked "1943",  which original byf coded only "43" was stamped.  The marking on CAW 98K is more closed to the original.  However, it out of stock!

So I'm still looking in the market for a nice receiver to match with the Kar98K stock.

MANKF

Completely agree with you Natrium C-Hing!  From my understanding.  CMC firstly made these mouldings, after CMC closed down, these mouldings are in the hand of CAW and continue the production,  so the mouldings are the same.
Concerning the 1st woodstock, I also want to know more,  I will put more photos with markings on this stock.  Hope you can give me more valuable comments.
By the way, better play safe and legally, with all these front band, rings ...and wood stock, I'm more than happy already

MANKF

Andy C-Hing, 我都係咁諗...買個玩具CMC or CAW receiver & bolt番离，照copy個鋼嘅換上去，當然車埋條barrel換晒啲front sight同rear sight.  但如果咁做....有冇人買番我copy完果支玩具先  因為成本都幾高，同幾浪費。所以仍在鬪爭中