lonelyboy11

各師兄，唔知點解我支PTW成日jam彈，砌完後打過四次games，次次一full就jam (無長full，一至兩秒左右)，單發就完全無事，點解呢？我係用 PTW MAX CQBR，601 內管，籃筒，7.4/11.1 Lipo 電, .28/.30 WE 彈，鴨仔擔閘。唔同組合都試過 (7.4 lipo with .28彈 or .30彈 ，11.1 lipo with .28彈 or.30彈)  有無師兄幫到手？？我把PTW有咩問題？煩各師兄幫手！Thank you very much!!!

[ 本帖最後由 lonelyboy11 於 6-1-2012 17:40 編輯 ]

jpg

有冇試過CHOP BB??
定係淨JAM, 點JAM 法?? JAM 係HOPUP 位??

lonelyboy11

唔好意思師兄，咩嘢"chop bb"?  啲彈jam响hop up and 上彈位度，啲彈塞到爆哂响上彈位度。

75ranger

Try to use Excel or Marui BB, but 0.25g only........

wing383

Same situation here, no problem with 0.25g…but jam with 0.28 or above , it may due to the problems of the spring of the mag, not strong enough for 0.28 or above …

aramua

引用:

原帖由 wing383 於 6-1-2012 18:32 發表
Same situation here, no problem with 0.25g…but jam with 0.28 or above , it may due to the problems of the spring of the mag, not strong enough for 0.28 or above …

yes~~~

長其涼美

師兄我同你一樣用魚糧袋we.25都jam,宜家用excel.23就無問題!

Elf

電C數唔夠好易會有. 你舊電係咪15C?

wing383

My ptw ok with WE or ksc  0.25, but jam like hell with 統之彈 0·25g…hahaha

lonelyboy11

Oh thanks!

lonelyboy11

引用:

原帖由 wing383 於 6-1-2012 18:32 發表
Same situation here, no problem with 0.25g…but jam with 0.28 or above , igt may due to the problems of the spring of the mag, not strong enough for 0.28 or above …

I got it!  Thanks!

Ancestor999

full auto 0.25g or under bbs can only be passed through 6.01inner barrel

aramua

i use 0.28 for 6.01inner barrel in full auto mode with no problem~~~~

Ancestor999

引用:

原帖由 aramua 於 6-1-2012 23:08 發表
i use 0.28 for 6.01inner barrel in full auto mode with no problem~~~~

same for me, but people suggest not to

kidult

引用:

原帖由 aramua 於 6-1-2012 23:08 發表
i use 0.28 for 6.01inner barrel in full auto mode with no problem~~~~

Ching 你支係m4a1 定cqbr??