joeyjordisonhin

KJ G23 改警星150﹪回樘桿問題請教
小弟因為將 KJ G23 全改了警星的鋼滑架外管和膠下身，但當裝上警星的 150﹪ 回樘桿後，發覺鋼滑架後退時，回樘桿不能和外
管保持平衡，整條桿往下墜。亦導至滑架覆進不順。
我參照原廠 KJ 的回樘桿，發現它前後都有固定外管和HOP UP組兩端的設計。
請問這是關鍵所在嗎？如何可解決這情況？請各大大幫忙。 苦惱中．．．

edison0918

For my case, the original kJ spring guide didn't work with guarder's steel outer barrel, so I had to buy guarder's recoil spring guide plus some polishing on the barrel to make it work smoothly

ayaka

我換左條150 彈弓落去原裝回鏜桿到

joeyjordisonhin

引用:

原帖由 ayaka 於 29-8-2012 21:24 發表
我換左條150 彈弓落去原裝回鏜桿到

拆到嗎？不是痴死的嗎？ 我都有諗過拆，但怕D啞鉛兩野拆斷．．．
請問拆時要注意D咩？

joeyjordisonhin

引用:

原帖由 edison0918 於 29-8-2012 20:02 發表
For my case, the original kJ spring guide didn't work with guarder's steel outer barrel, so I had to buy guarder's recoil spring guide plus some polishing on the barrel to make it work smoothly

磨滑條外管？

ayaka

引用:

原帖由 joeyjordisonhin 於 29-8-2012 23:00 發表


拆到嗎？不是痴死的嗎？ 我都有諗過拆，但怕D啞鉛兩野拆斷．．．
請問拆時要注意D咩？

加左螺絲膠, 我用火槍加熱就OK~

joeyjordisonhin

OH！！！ THANKS！！！ 師兄！！！

edison0918

Yes, although guarder's stuff said their aftermarket parts for KJ Glocks are CNC made, they don't fit perfectly... I had to polish the inner part of the slide and the outer barrel to make the gun runs smoothly...

ayaka

同埋我發現條鋼外管跌管不足, 有時唔夠油會卡SLIDE

eric04

chamber 內部太粗，省番滑再上油就得

ayaka

Thanks~ 等我試下先

joeyjordisonhin

引用:

原帖由 edison0918 於 29-8-2012 23:55 發表
Yes, although guarder's stuff said their aftermarket parts for KJ Glocks are CNC made, they don't fit perfectly... I had to polish the inner part of the slide and the outer barrel to make the gun runs ...

OK!! THANKS CHING!!!

joeyjordisonhin

引用:

原帖由 eric04 於 31-8-2012 00:54 發表
chamber 內部太粗，省番滑再上油就得

CHAMBER 內部是指邊個位？？

joeyjordisonhin

引用:

原帖由 ayaka 於 30-8-2012 23:39 發表
同埋我發現條鋼外管跌管不足, 有時唔夠油會卡SLIDE

呢個都係問題，另我發現KJ G23如果加左 GM 既零阻力擊鎚，唔知係咪FOR MARUI 唔夾KJ，換裝之後擊發既力明顯細左。

joeyjordisonhin

引用:

原帖由 ayaka 於 29-8-2012 23:20 發表

加左螺絲膠, 我用火槍加熱就OK~

師兄!請問係點拆條桿?扭定係點?我唔係好敢大力拆...