59 1234
發新話題
打印

木托的滋味〈二〉Mauser K98K

引用:
原帖由 Natrium 於 9-7-2011 23:59 發表

公公槍?
唔知了
我上網睇,馬交有種牌係咩有收藏價值定唔知乜鬼
好似比香港果個唔反對你擁有的公公槍牌方便

http://www.fsm.gov.mo/psp/cht/psp_top5_di_8_1.html



[ 本帖最後由 Andy 於 10-7-2011 00:10 編輯 ]

TOP

引用:
原帖由 Andy 於 10-7-2011 00:03 發表

唔知了
我上網睇,馬交有種牌係咩有收藏價值定唔知乜鬼
好似比香港果個唔反對你擁有的公公槍牌方便

http://www.fsm.gov.mo/psp/cht/psp_top5_di_8_1.html

香港想買公公槍又要點做呢?

TOP

引用:
原帖由 Natrium 於 10-7-2011 00:16 發表

香港想買公公槍又要點做呢?
搵到購買該槍的渠道(國外) ->搵香港班大帝->科水->等收槍
得個型號->搵班大帝->科水->等收槍
**我聽聞寶X食水無噤深

不過公公牌好_煩


唔夠玩"玩具"爽

[ 本帖最後由 Andy 於 10-7-2011 00:22 編輯 ]

TOP

回覆 41# 的帖子

Andy哥哥仔!啲轉載圖真係毒!死啦!馬交咁近,好有吸引力喎!不過個bolt真係好靚 真品的確係

TOP

回覆 47# 的帖子

Natrium C-Hing,公公槍個牌唔難攞,但聽啲資深C-Hing講,尼查你啲公公槍就煩啲!因為如果你有啲〝反動〞parts!佢哋可唔可以當睇唔到呢

TOP

回覆 42# 的帖子

Oh!  Natrium,  Your Tanaka is very nice! How much it cost?

TOP

引用:
原帖由 MANKF 於 10-7-2011 01:23 發表
Natrium C-Hing,公公槍個牌唔難攞,但聽啲資深C-Hing講,尼查你啲公公槍就煩啲!因為如果你有啲〝反動〞parts!佢哋可唔可以當睇唔到呢
死火好似睇唔明咩叫〝反動〞...
如果合法既公公槍+公公牌,唔會有反動part掛?
引用:
原帖由 MANKF 於 10-7-2011 01:34 發表
Oh!  Natrium,  Your Tanaka is very nice! How much it cost?
玩呢D玩具槍,我認為價錢大家都應該估到大約係幾多,只計個托應該同你差唔多
反而係放左幾多時間心機,做左幾耐研究同對reference,自我滿足一下

btw上次你講既長度問題,
我發現WaA 623托係比tanaka短少少的

[ 本帖最後由 Natrium 於 10-7-2011 14:22 編輯 ]

TOP

回覆 52# 的帖子

Completely agree!   The time which put on study and research back all the history and data are much much more valuable and can't measure by money!!!

Especially,  during the gather of every same parts,  study part by part, all the details and function,  compare with the tech. and history background at that period of time.   A combine of history and military equipment study,  this is the fun of a collector!!!

Natrium C-Hing happy that you taste the "real taste" of military history!!!

Just fit my title on this post "Taste of the Wood Stock"

TOP

回覆 1# 的帖子

今日番埋個mount同支鏡 可以開工啦 但我發現個白痴問題
個前mount點套落支鏡度 同點樣固定支鏡唔會氹氹轉
請各C-Hing提点指教!非常感謝

附件

Carl Zeiss Jena Zielsechs + Turret mount.JPG (62.72 KB)

16-7-2011 23:35

Carl Zeiss Jena Zielsechs + Turret mount.JPG

TOP

引用:
原帖由 MANKF 於 16-7-2011 23:35 發表
今日番埋個mount同支鏡 可以開工啦 但我發現個白痴問題
個前mount點套落支鏡度 同點樣固定支鏡唔會氹氹轉
請各C-Hing提点指教!非常感謝
You will have to take justment tower off, which means disassembly to mount the front turret.
You will have to silver solder the scope on the rings.
Some suggest arcaglass for re-act only.
For me, I am thinking about drill tapping the bottom of turret rings and use a small jimi screw to hold.

[ 本帖最後由 Natrium 於 18-7-2011 20:59 編輯 ]

TOP

回覆 55# 的帖子

Thanks Natrium C-Hing for all suggestions.  Due to my scope's front justment tower is very tight!  I need my friend's machine help to turn it out.  For fixing the scope firmly on the mount, what C-Hing suggested "silver solder", isn't it means 點焊,as my friend suggest 點焊at the bottom of the ring to fix the scope in position.  However, after that,  you can't take it out again.

TOP

引用:
原帖由 MANKF 於 18-7-2011 23:22 發表
Thanks Natrium C-Hing for all suggestions.  Due to my scope's front justment tower is very tight!  I need my friend's machine help to turn it out.  For fixing the scope firmly on the mount, what C-Hin ...
you'll have to remove bluing of position that soldered, apply thin layer of solder on the rings and the scope tube, then heat them.
REMEMBER you must remove all optical elements when you apply solder as heat may crack them.

TOP

回覆 57# 的帖子

Very useful information,  thank you Natrium C-Hing

TOP

回覆 1# 的帖子

裝個rear sight上去睇吓點先

附件

DSC07188.JPG (73.54 KB)

30-7-2011 00:11

DSC07188.JPG

TOP

 59 1234
發新話題