MS

Minebea M9 submachine gun was developed by Japanese Minebea company to replace obsolete US-made M3 submachine guns in service with Japan Self-defense Forces (JSDF). JSDF adopted this weapon during early 1990s to arm secondary military personnel like tank, vehicle and artillery crews (M9 is issued as a personal defense weapon instead of the traditional pistol). Minebea M9 is based on Mini-Uzi submachine gun. It was produced under license from IMI (now IWI Ltd), and it seems that it is no longer made. Some sources in Japan suggest that JSDF is looking to replace this submachine gun (which has some dubious features) with German-made HK MP5 submachine guns.

In its basic design, Minebea M9 submachine gun closely resembles the Mini-Uzi. It has the same simple blowback action with bolt that telescopes around the rear part of the barrel. Firing is from open bolt (presumably), in full and semi-automatic modes. Unlike its prototype, Japanese submachine gun is fitted with additional front grip and a flash hider on the barrel. On the other hand, there's no shoulder stock, and this greatly limits the accuracy of fire, especially when firing in full automatic mode with such high rate of fire.

[ 本帖最後由 mswong 於 6-5-2008 20:58 編輯 ]

zeta

引用:

原帖由 mswong 於 6-5-2008 20:29 發表

唔算新呀....?

近排4月動畫圖書館戰爭有大量此槍出現
更誤名為minimi

MS

大陸 SMG

[ 本帖最後由 mswong 於 6-5-2008 21:04 編輯 ]

sunny2014

長風o既CF05

MS

對不起,唔中


上圖 cf05 若不是女兒提醒,MS 差些攪錯!

[ 本帖最後由 mswong 於 6-5-2008 21:29 編輯 ]

cato

引用:

原帖由 mswong 於 6-5-2008 21:04 發表
對不起,唔中


上圖 cf05 若不是女兒提醒,MS 差些攪錯!

請問你女兒職業是什麼???

sunny2014

其實我成日攪錯左05式同CF05

MS

專業顧問.

cato

引用:

原帖由 mswong 於 6-5-2008 23:01 發表
專業顧問.

有趣既工作!
請問一般需要有什麼資格?

MS

韓國 SMG
Daewoo K7 submachine gun

Caliber  9x19mm Luger / Parabellum
Weight  4 kg
Length (stock closed/open)  620 / 800 mm
Barrel length  n/a
Rate of fire  ~1100 rounds per minute
Magazine capacity  30 rounds
Effective range  ~100 meters

The K7 submachine gun was developed by Daewoo Precision Industries Ltd Co, a subsidiary to the large DAEWOO Corporation. Daewoo K7 was developed to provide less expensive alternative to German-made HK MP5SD submachine guns, used by South Korean Special Forces. To achieve minimal costs and controls compatibility with other small arms in service with South Korean armed forces, K7 utilizes as many parts from Daewoo-made K1A and K2 assault rifles as possible. Daewoo K7 submachine gun is used by Special Forces of the South Korea and Indonesia.

Daewoo K7 submachine gun is blowback-operated, selective fired submachine gun. It fires from closed bolt, and employs hammer / fire control unit of the K1A assault carbine, borrowed along with aluminum alloy lower receiver. K7 is fitted with bolt hold-open device that holds the bolt open when last round from magazine is fired. The upper receiver is a modified K2 part, with omitted gas system. Telescoping buttstock is also borrowed from K1A carbine. Large magazine well has a special plug installed to accomodate shorter 9mm magazines. The most important feature of the K7 is its integral silencer, which is "wrapped" around the barrel and is said to reduce the sound signature down to about 120 dB.

[ 本帖最後由 mswong 於 6-5-2008 23:43 編輯 ]

MS

佢讀電腦,但老婆話佢做(設計)! 佢同我唔講佢 d 野,請諒?

[ 本帖最後由 mswong 於 7-5-2008 01:12 編輯 ]

cato

引用:

原帖由 mswong 於 6-5-2008 23:40 發表
佢讀電腦,但老婆話佢做切雞(設計) 佢同我唔講佢 d 野,請諒?

傻啦大家傾計..
問左咁多你私人事..我先請見諒

因為我係好多topic入面都見到你會話
阿女話老豆out...所以覺得佢好似好熟呢d野咁先問

積夫

ms爺爺的女兒也是做軍事相關的專業顧問？

MS

我的兒女在大學時同是唸電腦!

yobit

82式冲锋枪