LifeAfterDeath

引用:

原帖由 odyssey2007 於 7/4/07 02:33 發表
都係想睇下有冇機會自己試下用鋼杯士x2+ bearing x4 + 快斜齒+ 120%, 想睇下exactly 會發生咩事
如果我真係試左就再番黎呢個post report 下la~ (如果個post 冇沉到唔見左既話)
多謝各位師兄既指教~

go for it... but remember make sure shoot up to around 50000 rounds and report... since most problem won't see until you get to 40000-50000 rounds of BBs...

車厘子

引用:

原帖由 LifeAfterDeath 於 4-7-2007 02:33 發表


well in that case maybe the gear screwed up... so I am not sure... and nowadays since most people with with only 1.2J... no one willing to use those expansive gear anymore... maybe M14, sinpe ...

其實而家d 齒出得咁靚
systema d 斜齒都冇咩人用
聽完你咁講
我問個朋友拎一套試下玩先

LifeAfterDeath

引用:

原帖由 車厘子 於 7/4/07 02:36 發表


其實而家d 齒出得咁靚
systema d 斜齒都冇咩人用
聽完你咁講
我問個朋友拎一套試下玩先

拎...
I have to pay for it... even I do have discount... but again if you could... get 1st one is better then Xystema one...

I am using it on my P90 and next project... SAM-R

[ 本帖最後由 LifeAfterDeath 於 4-7-2007 02:38 編輯 ]

車厘子

引用:

原帖由 LifeAfterDeath 於 4-7-2007 02:37 發表


拎...
I have to pay for it... even I do have discount... but again if you could... get 1st one is better then Xystema one...

I am using it on my P90 and next project... SAM-R

朋友有spear systema 斜齒
試過自己應付到o既先買first

LifeAfterDeath

引用:

原帖由 車厘子 於 7/4/07 03:14 發表


朋友有spear systema 斜齒
試過自己應付到o既先買first

you are so lucky...

車厘子

引用:

原帖由 LifeAfterDeath 於 4-7-2007 03:38 發表


you are so lucky...

i think so

RC00078

引用:

原帖由 LifeAfterDeath 於 4-7-2007 02:22 發表


well then you can go for it... at least I have done it myself and with some of my friends also done that b4... (one of my friend do own a shop on "Gun Street"

BESIDE... I am say ...

咁又真係要試下..........
因為我對上一次又係唯一一次啤呤係打1 面力, 用左高扭斜齒

LifeAfterDeath

引用:

原帖由 華田 於 7/4/07 03:45 發表

咁又真係要試下..........
因為我對上一次又係唯一一次啤呤係打1 面力, 用左高扭斜齒

1 面力... which spring are u using? and beside using Helical Gear on spring is less then M120 will do no good at all...
if you do using Helical Gear with M120 will easy give you around 1,5J power... is like bottom of the Coke can...

RC00078

引用:

原帖由 LifeAfterDeath 於 4-7-2007 03:50 發表


1 面力... which spring are u using? and beside using Helical Gear on spring is less then M120 will do no good at all...
if you do using Helical Gear with M120 will easy give you around 1,5J ...

用第一既m100, 都未落場, 試槍0固陣己經爆, 齒都玩完埋
但係高扭齒我又唔覺得會影響到力喎.....

LifeAfterDeath

引用:

原帖由 華田 於 7/4/07 03:54 發表

用第一既m100, 都未落場, 試槍0固陣己經爆, 齒都玩完埋
但係高扭齒我又唔覺得會影響到力喎.....

it won't affect the fps... but it will make the motor last longer...

RC00078

引用:

原帖由 LifeAfterDeath 於 4-7-2007 04:01 發表


it won't affect the fps... but it will make the motor last longer...

我英文唔係咁好, last longer 係指長命d ?

lcy0069

搭單一問,我套新的first加硬齒裝上波箱後空轉時，點解會發出很大的声音，似齒輪的摩擦声，但都叫轉到，其實有冇問題？如有，又點解決？thanks!

RC00078

引用:

原帖由 lcy0069 於 4-7-2007 04:50 發表
搭單一問,我套新的first加硬齒裝上波箱後空轉時，點解會發出很大的声音，似齒輪的摩擦声，但都叫轉到，其實有冇問題？如有，又點解決？thanks!

你未set 好套齒囉....
有好多因素, 個麼打裝得啱唔啱啦, set 得夠唔夠啦, 用平齒有無留意番每粒齒既門距, 用斜齒有無俾番空間佢度橫向力, 杯士到底裝得
好唔好,
慢慢試下, set 齒都幾好玩架

14692

"set 齒都幾好玩".......可以玩成日

LifeAfterDeath

引用:

原帖由 14692 於 7/4/07 05:04 發表
"set 齒都幾好玩".......可以玩成日

indeed... but airsoft set gear is much easier then R/C car...