101653

講呢個Topic已經講到變哂質
誇越幾個post之後

由最開初講點樣做得似個現代身
講講下講到美軍公發M4A1
又講講下講到M4A1用A2下身出左咩問題
又再講講下講到M4A1係應該用A2下身既

我已經講到唔想講了
當係我錯, A2下身係岩既, 用現代身既錯哂
我係度講番聲對唔住, 我係全心全意老點大家既, 萬分抱歉

OFF TOPIC

蛇

等港版開箱文...

Hkpolice-Psu

VFZ


real steel(non mil type)



refer to this web pages, we can find that, now the type which vva are using is the full auto hammer. BUT VFZ.

http://www.notpurfect.com/main/ar15.htm

AR-15 Trigger group [size=-1]Hook milled from hammer, no extension on disconnector, and less radical arc on selector switch. Internal portion of trigger is narrower
	Top=AR-15 bolt carrier; Bottom=M-16 carrier [size=-1]Note the rear of the carrier (left side of photos) where the AR-15 unit has been milled further back, than the M-16 version.
M-16 Standard Full Auto Trigger group [size=-1]Note the hook on the upper portion of the hammer, also the extension on the back of the disconnector.	M-16 Tri-Burst Trigger Group [size=-1]The Trigger group of the M-16A2, is nearly identical to the standard group, except for the special disconnector, and the ratchet set on the auto sear. Along with many other changes, that A2 version of the M-16 features three round burst capacity, but no full auto fire.

more over, i found that vfz one still have a big tooling line in front of the lower

1996600

C兄,我想問把野幾錢??

siriochow

面京網表示有售了