CPK

引用:

原帖由 law 於 16-3-2011 21:12 發表
I just got a busted 490A motor a few months ago. Then I finally sent it to the UK guy for repair since I don't wanna spend another $1500 and get a busted motor after a few games.  He took about 3 week ...

Mind telling us which service u used?

[ 本帖最後由 CPK 於 16-3-2011 21:33 編輯 ]

law

引用:

原帖由 CPK 於 16-3-2011 21:25 發表


Mind telling us which service u used?

I had the motor rewind service + moisture proofing + hop mod.  Must send the whole lower body assembly to him for the repair. The total is over $2700 HKD including shipping cost.  Hope it is worth the money!

CPK

引用:

原帖由 law 於 16-3-2011 21:38 發表


I had the motor rewind service + moisture proofing + hop mod.  Must send the whole lower body assembly to him for the repair. The total is over $2700 HKD including shipping cost.  Hope it is worth ...

How could u send the whole lower to the UK, and had it back? DHL? No UK and HK Customs' problems?
It really looks like a real gun wor!

[ 本帖最後由 CPK 於 16-3-2011 21:48 編輯 ]

spec.ops.

引用:

原帖由 law 於 16-3-2011 21:38 發表


I had the motor rewind service + moisture proofing + hop mod.  Must send the whole lower body assembly to him for the repair. The total is over $2700 HKD including shipping cost.  Hope it is worth ...

師兄真係捨得
小弟對佢果防潮非常感興趣

law

引用:

原帖由 CPK 於 16-3-2011 21:41 發表


How could u send the whole lower to the UK, and had it back? DHL? No UK and HK Customs' problems?
It really looks like a real gun wor!

I send it by Fedex and he send it back using UPS.  I had no problem with the custom of both places. But of course, I have to write clearly that this is airsoft gun parts and cannot be modified to fire real ammunition. The UK guy had done this many times and got no problem with the custom.

law

引用:

原帖由 spec.ops. 於 16-3-2011 22:24 發表

師兄真係捨得
小弟對佢果防潮非常感興趣

If I have a choice, I wouldn't spend so much on a repair job.... but even the stock systema motor is not reliable, and I can't wait for Sailun CHing's solution... so finally decide to give this UK guy a try.

I didn't disassemble the lower part after I get it back, so I don't know what he did for the moisture-proof.  Maybe I can test it when I have a rainy day game.

Specter-X

引用:

原帖由 law 於 16-3-2011 23:38 發表


If I have a choice, I wouldn't spend so much on a repair job.... but even the stock systema motor is not reliable, and I can't wait for Sailun CHing's solution... so finally decide to give this UK ...

防潮喺喺電子版喥塗coating，喺鴨記可以買到材料，好簡單既我覺得唔需要搵佢整，不過摩打佢真係整得好掂加改良。

你到時候落完雨都一定要擦乾槍身啊如果唔喺好快生鏽。

Specter-X

終於整好咗支槍。證實喺摩打壞（唔驚喜）。

我買咗個CTW摩打，個樣無Systema果隻咁儬仔，不過聽review都話唔錯，至少有貨同埋無咁貴。

至於原本果隻Systema我打算send去UK專業維修+改良，如果CTW果隻仲work，留返做後備都一流。

今次最大得益喺對支槍認識多咗好多（雖然我已經喺自己裝KIT）。希望Systema能夠喺未來既版本作改良啦。

spec.ops.

引用:

原帖由 law 於 16-3-2011 23:38 發表


If I have a choice, I wouldn't spend so much on a repair job.... but even the stock systema motor is not reliable, and I can't wait for Sailun CHing's solution... so finally decide to give this UK ...

仲諗住佢係整個？去遮住電路部份添

spec.ops.

引用:

原帖由 Specter-X 於 17-3-2011 10:28 發表


防潮？？電子版喥塗coating，？鴨記可以買到材料，好簡單既我覺得唔需要搵佢整，不過摩打佢真係整得好掂加改良。

你到時候落完雨都一定要擦乾槍身啊如果唔？好快生鏽。

師兄可以介紹下D材料嗎？

mike523

你講coating是否lee隻

ayaka

E種唔係好夠"杰"

spec.ops.

引用:

原帖由 Specter-X 於 17-3-2011 11:55 發表
終於整好？支槍。證實？摩打壞（唔驚喜）。

我買？個CTW摩打，個樣無Systema果隻咁？仔，不過聽review都話唔錯，至少有貨同埋無咁貴。

至於原本果隻Systema我打算send去UK專業維修+改 ...

請問隻CTW摩打用落同PTW果隻有咩分別？我都死左兩隻PTW摩打，之前都有打算過搵人整返佢，但係唔知效果，所以唔敢試。始終Send過去整D收費都好金下

spec.ops.

引用:

原帖由 mike523 於 17-3-2011 14:11 發表
你講coating是否lee隻

呢D用黎塗氧缸內壁密氣同俾D齒潤滑就得，防潮真係未試過

spec.ops.

引用:

原帖由 mike523 於 17-3-2011 14:11 發表
你講coating是否lee隻

呢D用黎塗氧缸內壁密氣同俾D齒潤滑就得，防潮真係未試過