rho837

唉！ 我之前買唔到隻SEF身， 所以高價買左隻A3！ 家下有W之施SEF身， 見過啦感覺真係O WOR.

Wah! Thank you the following Ching the information.

[ 本帖最後由 rho837 於 13-9-2011 09:32 編輯 ]

combatfung

if Ching Use A3 Grip for VFC , U need to remove this parts, coz this is for A5, and cut th little pin that stop this parts, and the A3 seletor can be normal move to the 'F' position !

Pan

咁會唔會無得返轉頭用返A5 身呢 ??

一個新手

整返上去咪可以玩返A5囉

combatfung

can be become A5 that install with that parts

RCman

無痛直上

[ 本帖最後由 RCman 於 10-9-2011 15:01 編輯 ]

Armourer

引用:

原帖由 RCman 於 10-9-2011 11:26 發表

師兄，請問邊條pin？可以圈出來呢？我唔係好知邊個位. thx

That's why we decided to buy the W~C grip set, W~C selector is tailor made for it's MP5A3 grip, NO NEED to do any modification.

NOT every owner likes to damage his own GBB to fit the new stronger parts, otherwise we can't have the original GBB after installed all stronger parts later.

We bought W~C grip set because it just need to install the whole set on the original VFC and you may reverse the installation at anytime in your own will without any damage.

Armourer

引用:

原帖由 Pan 於 10-9-2011 00:08 發表
咁會唔會無得返轉頭用返A5 身呢 ??

Of course, if you cut anything from the origianl body GBB, it won't be reversed forever.

All depends on your own will.

Armourer

引用:

原帖由 RCman 於 10-9-2011 11:26 發表
無痛直上

Hello, the grip in your attached photos seems to be the W~C grip set that I got from 14 F yesterday.

Right ?

RCman

引用:

原帖由 Armourer 於 10-9-2011 15:05 發表


Hello, the grip in your attached photos seems to be the W~C grip set that I got from 14 F yesterday.

Right ?

yes,

5sfll970

引用:

原帖由 RCman 於 10-9-2011 11:26 發表
無痛直上

真係幾靚喎...
好想買...

combatfung

any ching can upload some photo about the grip metal end and front pin hole ! THX

KIN-KIN

請問各位師兄大哥，P 記的 A3 housing 的 selector 是否最像真？但喺安裝時是否一定要拆走支 MP3 一啲零件？拆咗就冇得返轉頭？工程大唔大呢？

Armourer

引用:

原帖由 KIN-KIN 於 12-9-2011 10:50 發表
請問各位師兄大哥，P 記的 A3 housing 的 selector 是否最像真？但喺安裝時是否一定要拆走支 MP3 一啲零件？拆咗就冇得返轉頭？工程大唔大呢？

Someone said the selector from Q~F (or P 記) is real stuff, even it is "real", so what ?

We are now all playing GBB, that "real" selector can not work properly in the original VFC MP5.

You have to cut the small pin away in the original trigger housing before you can use that "real" selector and it is totally irreversible.

Why should we use something claimed to be "real" on our GBB and damage our GBB ?

That's why we bought the W~C grip set, W~C selector is tailor made for it's MP5A3 grip, NO NEED to do any modification.

The W~C selector is more beautifal than that "real" one indeed.

NOT every owner likes to damage his own GBB to fit the new stronger parts, otherwise we can't have the original GBB after installed all stronger parts later.

We bought W~C grip set because it just need to install the whole set on the original VFC and you may reverse the installation at anytime in your own will without any damage.