stevenyu2000

請問 Xyxtema Complete Set 波箱好嗎 ? 還是其他牌子Custom好呢?

LifeAfterDeath

for newbie Xystema mechbox set is great to start with... but for ppl knew what is like inside the mechbox then I will suguess go with custom set up...

14692

都ok好用, 不過如果師兄識自己set波箱梗係自己set比較平

fuppc

引用:

原帖由 14692 於 12-7-2007 04:45 發表
都ok好用, 不過如果師兄識自己set波箱梗係自己set比較平

師兄咁有心得幾時係氣槍維修站，出D教學比大家呀？？

RC00078

引用:

原帖由 14692 於 12-7-2007 04:45 發表
都ok好用, 不過如果師兄識自己set波箱梗係自己set比較平

但係set 連埋個麼打.......唔會買到假野........
除非佢係連個set 都係.......

LifeAfterDeath

引用:

原帖由 華田 於 7/12/07 08:42 發表

但係set 連埋個麼打.......唔會買到假野........
除非佢係連個set 都係.......

well if I recall right... there are only those big airsoft shop in "Gun Street" carry the Xystema Mechbox set with motor... and I never heard there is fake/copy yet...

stevenyu2000

引用:

原帖由 LifeAfterDeath 於 12-7-2007 09:38 發表


well if I recall right... there are only those big airsoft shop in "Gun Street" carry the Xystema Mechbox set with motor... and I never heard there is fake/copy yet...

Right, that the one I see in Gun Street $16xx whole gear box set with motor, the shopkeeper say that was M100 power with high ROF. Thats what I want. If custom config, any suggestions ?

LifeAfterDeath

引用:

原帖由 stevenyu2000 於 7/12/07 13:19 發表


Right, that the one I see in Gun Street $16xx whole gear box set with motor, the shopkeeper say that was M100 power with high ROF. Thats what I want. If custom config, any suggestions ?

something like this:
Xystema 7mm bearing mechbox $420
1st gear set $500
1st Piston $190
1st Piston Head $110
1st Aero Cylinder Head $150
Xystema Spring Guide with Bearing $100
Xystema M100 Spring $60
Xystema Turbo Motor $430

this is about it...

14692

唔會化

14692

'皇帝手'8mm波箱報殼($390)+'第一'牌怏齒($400)+AC啤呤天梯set($130)+M100彈弓($60-80), 摩打/其他料用番馬記, 已經可以好好玩

stevenyu2000

講少一樣，我枝槍係AK，3代波箱

綜合各方意見
Gear Box : Marui 改 8mm bearing 定 King Arms 7mm Gear Box With Bearing 好 ?
Cylinder Set : Guarder Cylinder Set 連天梯 定 改用Deep Fire 天梯好 ?
Gear Set : Systema 平齒 定 Prometheus 好 ?
Spring : Systema 1J Spring 定 PDI / Prometheus ?

Motor 用回Marui EG700
一定要耐用為原則

謝謝幫忙

stevenyu2000

I plan to use 8.4V battery

Hkpolice-Psu

引用:

原帖由 stevenyu2000 於 13-7-2007 09:48 發表
一定要耐用為原則

原裝馬記IS THE BEST

LifeAfterDeath

引用:

原帖由 stevenyu2000 於 7/13/07 09:48 發表
講少一樣，我枝槍係AK，3代波箱

綜合各方意見
Gear Box : Marui 改 8mm bearing 定 King Arms 7mm Gear Box With Bearing 好 ?
Cylinder Set : Guarder Cylinder Set 連天梯 定 改用Deep Fire 天梯好 ?
G ...

most of them are almost the same... since you are not after ROF... Xystema gear is do good already (just not as hard as 1st)
Mechbox is really up to u... which one is cheaper then you can go for that...
Cylinder set (well since you want to play with around 1J... no need to change... maybe the Piston Head and Spring Guide with Bearing is optional for you...

hope this can help u out...

stevenyu2000

引用:

原帖由 LifeAfterDeath 於 13-7-2007 09:52 發表


most of them are almost the same... since you are not after ROF... Xystema gear is do good already (just not as hard as 1st)
Mechbox is really up to u... which one is cheaper then you can go ...

Since my cylinder is come from AK Beta, but now put with AK74 with 455mm 6.04 inner